I had a 2009 G8 on the dyno yesterday and couldnt download the trans tune. I was able to get the motor tune with no problem. Has anyone else aeen this? It would download until around 20% and lock up every time.
I had a 2009 G8 on the dyno yesterday and couldnt download the trans tune. I was able to get the motor tune with no problem. Has anyone else aeen this? It would download until around 20% and lock up every time.
I have seen something similar when the GMLAN was incorrectly terminated. i.e. did not have the 120ohm resistor across it when the TCM was on the bench and ECM was not connected. Cant imagine you have the same thing being a complete vehicle. Though a dealer buddy of mine reports that most faults are simply loose connectors that have popped out.
FWIW.
I am tuning the car next week after installing a CAI, UD pulley and cat back. I need to have this resolved by then.
Sorry, but we need to ask the usual questions.
Software versions and V2 firmware versions you are using.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
If you do online update you will get up to build 66 and firmware .20
Not sure if that will help, but it might..
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
Its worth a try plus it doesnt hurt to always have the latest update.
Ok Im up to date now. I wont have the car back until next week though.
Last edited by minytrker; September 30th, 2008 at 05:55 AM.
Hopefully by the time the car is back in your shop we will have the 2009 TCM mapped out. I expect it to be done by Tuesday (my time), Monday US time. I know there is about 5 new TCM OS's for 2009, so the G8 might be using one of them.
But I think the 2009's are still using the TCM OS 24243170 which is already supported, but these days who knows, there might be another update as the G8 seems to be a small step ahead of the country where they are made
With regards to the read issues, so far none of the local 2009 Holdens are reporting similar issues.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I wil have the car back on Tuesday for CAI, cat back, UD pully install and dyno tune. I will trt to read it first thing when I get the car.