Tuning the transient parameters

[Highlander]

what i want is to be able to floor the car with the traction control and 1)doesn't wheelspin 2) doesn't bog.

[hquick]

Good job Ross!

[Highlander]

There the ones that I posted in the other ETC thread. You have seen them all ready. Those are ETC control parameters which in turn work in with traction control. They will give you a sharp feel If that's what your after. I can look around for more parameters just need to really understand what type of effect you are after. Sounds like your after launch control and the ability to fine tune it so you just turn the tyre.

Let me know and I will have a look.

Cheers

Mick

Can you add those parameters for this OS on a CAX file?
12221588 and 0202005?

Thanks Mick!!!!

[MICK]

I will have a look see and get back to you.

Cheers

Mick

[Highlander]

have you had time to play with this mick?

[MICK]

To be honest, I don't remember writing that....

Had a quick look at the part numbers you supplied.

12221588 = custom op 0203005
12212156 = custom op 0202005

Either way these operating systems would be pretty close.

Need a calibration for 12221588 to work with and make sure it looks good, if this is what your after. If it is 12212156 I have plenty.

Could you confirm which operating system for me.

Cheers

Mick

[5.7ute]

I also see 6 parameters for Steady State and the thresholds at which this mode is considered active. Might have a play around and add these as well. Could make things interesting.

Cheers

Mick

Have you had any luck with this yet Mick?

[MICK]

Umm, Yeah I did add them into a cax that I did for Howard some time ago. I remember that I left the data in it's raw format unscaled. Funny you of all people should be asking about them as no one really caught onto what there used for.

I can have a dig around if your interested.

Cheers

Mick

[5.7ute]

When you get time that would be great. (os 12225074)
I was hoping on using these to sanity check what I have done with the IPW work. Also it will build a better filter for AutoVE as you know.
Thanks,
the other Mick

[Highlander]

I thought the tune files were encrypted... how do you check these?

Thanks