Results 1 to 3 of 3

Thread: .cax confusion!!!

  1. #1
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default .cax confusion!!!

    I know for sure that I have installed the 12202088.cax into the calibration folder. I can open it and read it. I have downloaded Howards tune, but the Transient tables aren't there. Would anyone have any ideas of what I might be doing wrong or have set wrong? I am not too computer savvy---So explain it like you are talking to a 3 yr. old.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

  2. #2
    Lifetime Member MICK's Avatar
    Join Date
    Mar 2005
    Posts
    226

    Default Hummm

    Jeff,

    Howard's tune is a cos3 with the operating system ID of 01270003.

    Rename the cax file to this operating system part number and you will see the Transient Parameters.

    To explain this a little. This cax file will support the following operating system part numbers. 12202088, 12208322 and 01270003.

    What you all need to do is make three copies of this cax file and rename them with the above operating system part number ID's, then copy these three files into the calibrations folder.

    You will be able to view the Transient Parameters on these operating systems only. If you do this your away.

    When you update information on the parameters you must apply the updated information to all three cax files.

    You should be able to sort this easy, I know you got the goods....

    Cheers

    Mick
    Rev it up, Drop the clutch, See what happens?

  3. #3
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    Sweet!!

    Thanks for the explanation Mick. It works

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

Similar Threads

  1. more confusion
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: October 28th, 2014, 02:00 AM
  2. Supported Vehicle list confusion
    By 01Z in forum Purchase and Shipping
    Replies: 9
    Last Post: April 7th, 2009, 08:16 AM
  3. Firmware update confusion
    By voodoolord in forum FlashScan V2
    Replies: 2
    Last Post: October 20th, 2007, 05:20 AM
  4. PID confusion
    By redhardsupra in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: July 24th, 2006, 01:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •