For the 2003+ 1mb PCMs? I didnt think there was a seperate LC patch for them. The Patch that MICK uploaded has the LC tables, but it also has the non-functional Transient Fuel tables. Is there a LC .CAX for the 1mb PCMs with no TF tables?Originally Posted by joecar
2014 GMC 2500HD RCLB SLE
LML / Allison
Hummm
ROCK AND ROLL BABY!!.....
Cheers
Mick
Rev it up, Drop the clutch, See what happens?
Hummm
I will fix that up for you....
Cheers
Mick
Last edited by MICK; April 7th, 2009 at 10:35 PM.
Rev it up, Drop the clutch, See what happens?
Remember the original LC patch .cax files that Richard posted here -
http://forum.efilive.com/showthread.php?t=9111
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Those are the ones.
Sweet MICK!! Thanks Man.I will fix that up for you....
Cheers
Mick
There is some serious chatter out there about this new addition to the software......sounds like some HPT guys are fed up and jumping ship..LOL.
There is plenty of room on this boat for you guys too!!
2014 GMC 2500HD RCLB SLE
LML / Allison
Will this work for the cos 3 as well??
2006 Trailblazer SS
Twin Turbo 67 Chevy Truck
SOLD Truck 2002 Chevy kb turbo t70 5.7l
The transient fuel tables update will cover from 98 to current LS1 OS's, including custom OS's.
We were going to release them before Easter but it all got a bit tight before we all headed away for a few days break. I had Emailed the updates to a few people prior to leaving, so by the time we are ready to release the update it will be well and truly tested.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
This update has been release by the way, just do a check for new update next time you are on the internet and the new .calz files for the GenIII's will be downloaded.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Thanks very much Ross.
Hey...in the .CAX files we have an impact factor modifier/multiplier. Is it poissible to have that implemented? It seems to be a very handy table and I've had a lot of success playing with it.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Posting Permissions
Reply With Quote
