When I want to do some data logging with my V2 and no laptop I don't see Vortec listed in the PID list. Is Vortec not available? Do I need to add a Vortec file in the config files on the EFI explorer? I'm stuck......
V2 Black Box data logging*vortec pid's*
When I want to do some data logging with my V2 and no laptop I don't see Vortec listed in the PID list. Is Vortec not available? Do I need to add a Vortec file in the config files on the EFI explorer? I'm stuck......
No-one :(
I pm'd Paul.
You can just create a new entry in the Options.ini file and set up your own PIDs for the vortec.
Until I create a Vortec.pmm file, you shoul dbe able to use the LS1B.pmm file.
That will mean some PIDs may or may not be supported - you'll need to do a validate PIDs on the laptop based scan tool to know which PIDs are valid for the Vortec.
Regards
Paul
Before asking for help, please read this.
Ok, 16 of the 18 Pids are showing that they are valid. The unlucky one's are...EOPS & AFR :(
Last edited by GAMEOVER; October 3rd, 2008 at 03:57 AM. Reason: Haha
YES, I finally got it to workI'm a data logging "SOB" now. WooHoo!!! Thanks alot Blacky-(Paul)
JB
Last edited by GAMEOVER; October 3rd, 2008 at 02:23 PM. Reason: hehe
Hi,
can you post your ini file to see what pids are working (I have a S15 SLT -4.3 Vortec)? I would be happy if I can use BBL on that car too
Many thanks in advance!
Marco
GAMEOVER, did you get AFR to BBLog...?
No Joe, That's one of the pids that won't work. When I data log using my V2 & laptop It will work but I've got to use the AFR PID from the LS2 B. So in the meantime(while I data log laptopless) I'm using my LC-1 for my AFR but it's been acting real erratic lately :( don't know what's going on with it!!!
JB
Are you using the serial/digital AFR signal or the analog AFR signal from the LC-1?Originally Posted by GAMEOVER
Regards
Paul
Before asking for help, please read this.
Posting Permissions
Reply With Quote