Dumb question.
I got a SD card today to start BBL. But, I'm stumped as far as how to change the pids you can montior on the Flashscan. It gives me a list to select, how do you edit it?
Sorry for the stupid question. This is all new to me.
Dumb question.
I got a SD card today to start BBL. But, I'm stumped as far as how to change the pids you can montior on the Flashscan. It gives me a list to select, how do you edit it?
Sorry for the stupid question. This is all new to me.
2011 Chevy 2500HD LML 4x4 LTZ-Black
-H&S Mini Maxx | MBRP 5" w/Muffler | 4" Rancho Lift | BMF REPR 20x9 DM | Mickey Thompson ATZ P3's 35/12.50's.
2012 VW Jetta TDI - Daily Driver.
SOLD - 06 LBZ
EcoDieselRam Forum
you have to manually type them in the options.ini file you load on the FS unit.
'07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that
'06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor
465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME
You have to edit the file Options.ini located in C:\Program Files\EFILive\V8.1/Config...
Then connect your V2 to your PC and run EFILive Explorer (EE), click on the Config tab, drag the correct .pmm file (for your ECM) from the upper pane (your hard disk) down to the lower pane Config tab (your V2).
See these 2 sections of the readme file (see attached):
- Configure FlashScan and/or AutoCal for BB logging
- Using BB Logging
V2 BBL only works if you have updated your V2 bootblock, or if it already came updated.