Actually fact. Epoxy floor paint and acrylic car paint. Rapidly gets them both.Originally Posted by kbracing96
Another NON-factual E85 myth, LOL... Unless you painted your car with no prep work and paint you found in your barn from 30 years ago,
Actually fact. Epoxy floor paint and acrylic car paint. Rapidly gets them both.Another NON-factual E85 myth, LOL... Unless you painted your car with no prep work and paint you found in your barn from 30 years ago,
when will it be available for gen 3 pcm's??
01 Z06, 4L60E CONVERSION, L92/L76 TOP END, 72# LS3 INJECTORS (THANKS FIC), DRY NITROUS, COS5
Did GenIII PCM's ever have flex fuel?
Yes. Going back as far as 2002 (maybe even 2001), you could get a flex fuel tahoe (VIN Z, L59 engine). It has an alcohol sensor to determine ethanol content as well as 33#/hr injectors as opposed to the 25#/hr injectors that the VIN T/LM7 non-FFV 5.3L has.
Well it looks like the EFILive wizards have that covered too. At the very least, the L59 for 03 & 06 look like they have Flex Fuel options listed.
nope... they did not
01 Z06, 4L60E CONVERSION, L92/L76 TOP END, 72# LS3 INJECTORS (THANKS FIC), DRY NITROUS, COS5
Unlikely to see the factory flex fuel listed as a calibration if it does not come from GM like that.
The later ones (E38/E67 etc) have flex fuel capability built in. EFILive has given more access to that with this release which simplifies things somewhat.
There are shops doing E85 cals on LS1's though. I would guess VE table etc and spark are the main areas to maximise the value of the E85.
An E38 flex fuel cal gives a reasonable idea of what GM is doing to support flex fuel.
I've had several vehicles pre E38 or E67 that were Flex Fuel. Though it wasn't called that back in the day.
Sounds interesting! LS1/LS6/LS2 ? Truck?
so can i use the ff option that efi has listed w/ build 72 on my gen 3 pcm or not?
01 Z06, 4L60E CONVERSION, L92/L76 TOP END, 72# LS3 INJECTORS (THANKS FIC), DRY NITROUS, COS5
Posting Permissions
Reply With Quote