Results 1 to 8 of 8

Thread: Cos3 (2bar)

  1. #1
    Senior Member
    Join Date
    Nov 2007
    Posts
    149

    Default Cos3 (2bar)

    When I went from stock os to the Cos3 2bar tune.
    When I reflash my truck it will run for sec than die. I had to do this two or three times before it run on it's own. Do need to do a crank re-lean after you do this or this common thing.
    2006 Trailblazer SS
    Twin Turbo 67 Chevy Truck
    SOLD Truck 2002 Chevy kb turbo t70 5.7l

  2. #2
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Not saying I'll know how to help....but it always helps to post your tune so others can see if there's any obvious issues.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  3. #3
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Might just be your idle learning. Which might suggest that your base map might need some work
    If its ok now Id say thats what the problem was. Look into the RAF and Idle transition tuning notes.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  4. #4
    Senior Member
    Join Date
    Nov 2007
    Posts
    149

    Default

    It does this ever time i reflash for an update.
    2006 Trailblazer SS
    Twin Turbo 67 Chevy Truck
    SOLD Truck 2002 Chevy kb turbo t70 5.7l

  5. #5
    Lifetime Member Chevy366's Avatar
    Join Date
    Oct 2006
    Posts
    1,603

    Default

    Every time it should stumble (MAF fails goes into SD) a little but should not fail to start and stay running .
    Post up your .tun .
    2005 1500 HD , Custom OS3 SD tune .
    2006 Trailblazer
    Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .

  6. #6
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,371

    Default

    Are you running OLSD (mafless) with the Cos3 tune?
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  7. #7
    Senior Member
    Join Date
    Nov 2007
    Posts
    149

    Default

    Quote Originally Posted by hquick View Post
    Are you running OLSD (mafless) with the Cos3 tune?
    Yes
    2006 Trailblazer SS
    Twin Turbo 67 Chevy Truck
    SOLD Truck 2002 Chevy kb turbo t70 5.7l

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Did you follow the COS tutorial...?

    Did you do full flash of COS followed by cal flash of your old tune...?

    Is your COS file compatible with your old tune as listed on the COS tutorial page 4...?

Similar Threads

  1. To 2bar or not
    By Slowrc in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 11
    Last Post: May 12th, 2010, 04:24 AM
  2. e38 2bar sd
    By b18cls1 in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: November 28th, 2008, 06:17 PM
  3. 2bar with mac e67?
    By SScarTuning in forum E37, E38 & E67 PFI ECM's
    Replies: 1
    Last Post: October 27th, 2007, 08:12 AM
  4. 97 2bar
    By slowhawk in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 15
    Last Post: September 28th, 2006, 11:46 AM
  5. 2Bar ?'s
    By MN C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: March 20th, 2005, 01:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •