Results 1 to 2 of 2

Thread: 12587603 os for a flex fuel option

  1. #1
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default 12587603 os for a flex fuel option

    Could someone look at the PCM 12587603 os to see if there is a turn on option for the flex fuel option? I think it would be located in the system operations tab. I am banging my head against the wall on an issue tryin to get my 4.3l v6 to run flex fuel. This same os in avaliable in a truck that has flex fuel, but for some reason my truck won't start on the cal. I am thinking there is something hidden in the system tab to enable the output. In the engine cal the tables are there, and the enablers are enabled but the pcm isn't looking for the input from the sensor. So I am thinking something is there in the system tab that is still hidden from my view. I could post the tune I am using, but I am not sure how to do it on here.

    Thanks
    Kurt

  2. #2
    Senior Member
    Join Date
    Aug 2007
    Posts
    126

    Default

    Here is the tune I am running.
    Attached Files Attached Files

Similar Threads

  1. Looking for the flex fuel pin in a e40
    By 1meangto in forum Gen IV V8 Specific
    Replies: 13
    Last Post: November 16th, 2017, 06:50 PM
  2. Flex Fuel for LS1
    By mr.prick in forum Custom Operating Systems
    Replies: 15
    Last Post: July 6th, 2014, 04:21 AM
  3. E38 Flex Fuel OS ???'s
    By GAMEOVER in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: November 3rd, 2009, 03:40 PM
  4. Flex fuel sensor
    By vzsv8 in forum Gen III V8 Specific
    Replies: 0
    Last Post: February 24th, 2009, 10:35 PM
  5. Converting a NON-Flex fuel vehicle to Flex fuel??
    By kbracing96 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 1st, 2008, 05:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •