i cant seem to find anything on bbl and fjo. how do i set up to display afr on my v2 using my fjo wb. do i need a specian cable or am setting it up wrong? a little help guys. thx
i cant seem to find anything on bbl and fjo. how do i set up to display afr on my v2 using my fjo wb. do i need a specian cable or am setting it up wrong? a little help guys. thx
Have you read this already?
you need to configure the options.ini file for the PIDs you want.
location of the file:
C:\Program Files\EFILive\V8.1\Config.
"-", WO2AFR1
"-", WO2LAM1
"-", WO2ST1
"-", BEN1
im still confused. do i need a serial cable for the fjo unit to display afr on the v2 or am i just setting up the files wrong? sorry i took so long to respond been busy at work.
You need a serial cable.
You need to edit those into the Options.ini file (located under C:\Program Files\EFILive\V8.1).
where would the cable plug into the fjo unit? and how do i edit. anybody sell a pre-made cable? any way you could give me some over the phone help?
Last edited by articSS; October 8th, 2008 at 10:49 AM. Reason: spelling
I'm not sure... does your FJO have a means of serial output...?
See post #9: showthread.php?t=7502&highlight=FJO+serial
thx. i sill dont understand how to edit the folder