Can you copy the log text that is printed during flashing and paste it here...
(you may have to go into options and disable the 15 second countdown timer)
(( you would still have to wait 15 seconds after a flash ))
Can you copy the log text that is printed during flashing and paste it here...
(you may have to go into options and disable the 15 second countdown timer)
(( you would still have to wait 15 seconds after a flash ))
Try flashing again...
Make sure nothing interrupts the bus or power (i.e. no dome light, no radio, no On-Star).
23:04:59.304: Interface firmware version: 2.5.20
23:04:59.320: Interface firmware date: Aug 06, 2008
23:04:59.337: FlashScan serial number: 003703154392
23:04:59.356: FlashScan license number: 003703154392
23:04:59.383: Disconnecting ...
23:05:00.043: CAN-VPW Bridge Deactived
23:05:00.047: Disconnected
23:05:00.659: Scanning for EFILive FlashScan V2 USB
23:05:03.018: Scanning for EFILive FlashScan V2 HAPI
23:05:03.209: Interface firmware version: 2.5.20
23:05:03.227: CAN-VPW Bridge Actived
23:05:03.255: Current protocol set to: "ISO 15765 CAN"
23:05:05.344: Current protocol: "ISO 15765 CAN"
23:05:05.372: Interface firmware model: FSV2
23:05:05.392: Interface firmware version: 2.5.20
23:05:05.414: Interface firmware date: Aug 06, 2008
23:05:05.436: FlashScan serial number: 003703154392
23:05:05.458: FlashScan license number: 003703154392
23:05:05.511: Getting status...
23:05:05.907: Status: OK.
23:05:06.738: Preparing ECM for reflash...
23:05:06.765: ECM seed is: $C9D5
23:05:06.775: Unlock attempt 1 of 1
23:05:06.907: Initializing ECM...
23:05:08.251: Request GM operating system...
23:05:08.280: GM operating system: 12617083
23:05:08.815: Request serial number...
23:05:10.661: Serial number: 864801812850
23:05:13.537: Reflashing ECM's memory...
23:05:18.013: Erasing ECM flash memory... (please wait up to 2 minutes)
23:07:21.030: ECM flash memory erased OK
23:07:38.078: Reflash failed, aborting...
23:07:38.091: Total time: 02:20
23:07:38.103: Data compression achieved: 0.0%
23:07:41.120: Interface firmware version: 2.5.20
23:07:45.156: Attempting to reboot ECM... (please wait up to 8 seconds)
23:07:48.279: Waiting for ECM to complete reboot process... (Retry 1 of 8)
23:07:50.295: Waiting for ECM to complete reboot process... (Retry 2 of 8)
23:07:52.313: Waiting for ECM to complete reboot process... (Retry 3 of 8)
23:07:54.330: Waiting for ECM to complete reboot process... (Retry 4 of 8)
23:07:56.349: Waiting for ECM to complete reboot process... (Retry 5 of 8)
23:07:56.385: ECM has booted successfully...
23:07:57.651: Reflashing completed successfully
23:08:01.510: Done!
When it tried to reboot i had to turn the key on for it to reboot, thats why it failed a few times
Fixed, idk, what it was, i just did everything you said, and a little more, thanks for your time, i appreciate it. Wouldnt be a fun ride to work on a bike lol. thanks again!!!
I no longer monitor the forum, please either post your question or create a support ticket.
pretty sure that was it, i think i might have either turned it on or off during the flash, something that small had me freakin out lol. i appreciate your guys' time
No problem, put the bus schedule away now
I no longer monitor the forum, please either post your question or create a support ticket.