reading Problem ( LC-1 logwork & gage & EFIlive )

[Ls1_Rulz]

hi all

i just bought new LC-1 with DB-Gage

the gage not same data in PC ??

see the video .
http://www.youtube.com/watch?v=lBVWWOMYUCU

and the EFI live scantools read 9.00 - 9.45 AFR_LC11

which one now th read correct AFR ??

!

[joecar]

On the PC, is that LogWorks...?

Which pid are you using in the EFILive scantool...?

Are you connected to EXT.AD1...?

Are you using FlashScan V2...?

[Ls1_Rulz]

On the PC, is that LogWorks...?

Which pid are you using in the EFILive scantool...?

Are you connected to EXT.AD1...?

Are you using FlashScan V2...?

1- yes logWorks

2- I select it from file in EFilive folders AutoVE-lc1.pid

3- yes EXT.AD1

4- yes i use V2

[joecar]

Is your LC-1 programmed to the default voltage->AFR translation...?

Is the LC-1 brown wire connected to AD1+...?
What LC-1 wire is connected to AD1-...?

[Ls1_Rulz]

1- yes

2- brown wire to the gage .

3 - AD1+ = yealow
AD1- = white

[joecar]

What are the programmed points on LC-1 channel 1 (yellow)...?

[joecar]

The "right" AFR will be on the LC-1's serial link, regardless of how it's programmed...

Have you seen the V2 BBL serial AFR feature that some people are using...?

[Ls1_Rulz]

The "right" AFR will be on the LC-1's serial link, regardless of how it's programmed...

Have you seen the V2 BBL serial AFR feature that some people are using...?

no what is that BLL serial ??!!!!

I'll connect brwon wire to AD1 + >> to see what will happen !
abd the yellow wire to the gage ...

[joecar]

Have a read thru these:
showthread.php?t=8741
showthread.php?t=8384
showthread.php?t=8115

Basically, V2 is able to read the serial comms bitstream from the LC-1 (and various other widebands) and obtain the AFR from this.

[joecar]

If your LC-1 is set to default, then brown wire (analog 2) matches the CALC.AFR_LC1x pids, and the yellow wire (analog 1) matches the NBO2 input.