Results 1 to 8 of 8

Thread: fjo serial cable questions..please help

  1. #1
    Member
    Join Date
    Mar 2007
    Posts
    64

    Default fjo serial cable questions..please help

    has any one made a serial cable for the fjo wb to connect to the v2 yet? thx.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post pictures of your FJO showing the serial port on it...

    If it has a DB9 connector, then all you will need is a DB9 cable and the null-modem adapter.

  3. #3
    Member
    Join Date
    Mar 2007
    Posts
    64

    Default

    it does not have a connector just wires. this is what the manual says" This will require that your PC have a serial port or USB/serial adapter. To install the black PC serial cable, connect the red wire from the PC cable to the white/green wire of the controller. Now connect the brown wire from the PC cable to the white/red wire of the controller. Finally, connect the black wire from the PC cable to a good ground point. The PC cable can now be connected to the serial port of your PC.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which PC serial cable...?

    If you can identify Tx, Rx, and Gnd it is very simple to make a cable.

  5. #5
    Member
    Join Date
    Mar 2007
    Posts
    64

    Default

    the manual i have is this one it dosent say tx or rx? i cant upload yhe manual it too big to attach but i downloaded off of fjo.com

  6. #6
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    MAKE SURE WITH FJO

    connect the red wire from the PC cable to the white/green wire of the controller. Now connect the brown wire from the PC cable to the white/red wire of the controller. Finally, connect the black wire from the PC cable to a good ground point


    it seems the white/green wire is TX and, the white/red wire is RX.

    RJ12
    1 = Tx Data
    2 = Rx Data
    5 = Ground
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  7. #7
    Member
    Join Date
    Mar 2007
    Posts
    64

    Default

    fjo support said it would not work with serial only analog so im buying a new wideband. any suggestions?

  8. #8
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    Lc-1
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

Similar Threads

  1. Flashscan to LM-2 Serial Cable
    By TAQuickness in forum FlashScan V2 BB Logging
    Replies: 19
    Last Post: May 2nd, 2016, 09:36 AM
  2. serial port cable that goes to v2
    By articSS in forum FlashScan V2
    Replies: 26
    Last Post: August 19th, 2014, 11:57 AM
  3. Serial V2 questions
    By Slowrc in forum General
    Replies: 36
    Last Post: January 23rd, 2010, 10:42 AM
  4. FlashScan to LC-1 Serial Cable Diagram
    By Blacky in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: November 26th, 2009, 06:50 AM
  5. Tried making own Serial Wideband Cable, HELP!!
    By edwardzracing in forum FlashScan V2
    Replies: 11
    Last Post: March 18th, 2009, 03:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •