No A/F!!

[minytrker]

I have done the updates, (seemed to all go OK) But now I cant log my air fuel through serial. All I get is controller not found.

Need help ASAP!! Have car sitting on dyno since Friday with still no fix.
I have
bootware 2.06.02
16oct08

firmware 2.06.05
28oct08
__________________

[mr.prick]

you need to select the WBO2 through the V2.
F4 > F1 > F1 scroll down to WO2 type and select your WBO2 press Ok.

[minytrker]

you need to select the WBO2 through the V2.
F4 > F1 > F1 scroll down to WO2 type and select your WBO2 press Ok.

Thats all been done. It still says no controller found. It did work until the latest update.

[joecar]

What WB...?

[minytrker]

innovate lm1

[joecar]

Lorenz,

Did you set all of these:
- serial pids = yes,
- com in = wide 02,
- com out = wide 02,
- wo2 type = innovate,
- wo2 fmt = both,
- wo2 data = AFR & EQ.

[minytrker]

Lorenz,

Did you set all of these:
- serial pids = yes,
- com in = wide 02,
- com out = wide 02,
- wo2 type = innovate,
- wo2 fmt = both,
- wo2 data = AFR & EQ.

Yes,

I even tried changing them and then setting them back to what you have posted.

[joecar]

And you have the serial AFR cable plugged in...?

And this same cable worked before...?

[joecar]

I pm'd Paul... he may be on his way to SEMA which starts tomorrow.

[minytrker]

And you have the serial AFR cable plugged in...?

And this same cable worked before...?

Yes its plugged in. Yeah its worked for a good while, used it daily.