Results 1 to 3 of 3

Thread: What are the exact steps for running an LC-1?

  1. #1
    Lifetime Member
    Join Date
    Jun 2005
    Posts
    296

    Default What are the exact steps for running an LC-1?

    I have it all hooked up and calibrated.

    My question is... in my EFILIVE software, what do I activate and where do I find it. My EFILIVE instruction book is way to vague.

    I have tried to use and can not get it to read on my EFILIVE. I have changed some settings, but it is not working.

    Please help.
    '71 chevelle
    Twin turbo ls1
    1000 HP 93 octane street car!
    96 lb injectors

  2. #2
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    The instruction manual was pretty straight forward for me

    and this post was stickied right above your post. Easy to follow directions

    http://www.efilive.com/forum/viewtopic.php?t=1145

    Most of your questions have been answered at least 3 times on the board use the search feature and i am pretty sure it will steer you in the right direction..
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    The LC-1 is now pre-configured in EFILive (V7.3) so you don't need to set up your own calculated PIDs.

    Select and log the following PIDs:
    {EXT.AD1} or {EXT.AD2}
    {CALC.AFR_LC11} or {CALC.AFR_LC12}
    {CALC.BEN_LC11} or {CALC.BEN_LC12}

    Whether you choose "1" or "2" as the last digit in the above PIDs is determined by which pin you connected your LC-1 "Analog 2" wire to on FlashScan.
    If you connected the LC-1 "Analaog 2" wire to FlashSCan pin "E", then use "1", if you connected the LC-1 "Analaog 2" wire to FlashSCan pin "C", then use "2".
    Make sure you connect the Analog ground to PIN "D" on FlashScan.

    Regards
    Paul
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	flashscan_pinouts_146.gif 
Views:	278 
Size:	43.6 KB 
ID:	178  

Similar Threads

  1. IAC steps??
    By hquick in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: August 31st, 2008, 09:38 PM
  2. how bad is 140 IAC steps?
    By gcross in forum Gen III V8 Specific
    Replies: 5
    Last Post: January 29th, 2007, 06:15 AM
  3. IAC steps.
    By Big Kahuna in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: January 9th, 2007, 10:16 AM
  4. IAC vs IAC EA vs steps
    By SSpdDmon in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: March 23rd, 2006, 03:54 PM
  5. Tuning steps
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 1st, 2005, 12:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •