I have done the procedure a few times and it still displays the same start up temp.
This is on a 2007 z06.
I am wondering if it has anything to do that the car was ls2edited.
Thanks
I have done the procedure a few times and it still displays the same start up temp.
This is on a 2007 z06.
I am wondering if it has anything to do that the car was ls2edited.
Thanks
"All that is needed for the triumph of evil is that good men do nothing..."
Have you tried reflashing with a stock tune file (full flash if you can, cant remember if we can yet on E38s) then applying the patch?
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Fan patch has not worked correctly since build 64
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
How can I make them start correctly?? installing a lower build?
"All that is needed for the triumph of evil is that good men do nothing..."
I did a car today and found the following.
Follow the normal process to aaply the patch.
Then open G0901. The first vaue is still 89'C, but it repesents a value about 9'C lower.
If you want to activate the fans at 90'C, then change the % in the 99'C.
You might have to play with values to get the desired values.
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
oohh.. Interesting.. will do that tomorrow when the car comes in.
"All that is needed for the triumph of evil is that good men do nothing..."
Confirmed.. its working...
"All that is needed for the triumph of evil is that good men do nothing..."
yes.. but they are working correctly as said above
"All that is needed for the triumph of evil is that good men do nothing..."