Additional PID definition ?

[Blacky]

Thankyou. Now just need to find the PID number associated with the PID name. Would I be right in assuming all the GM PIDs that already appear in the Scantool PID list are associated with the VIN/ECM type and are embedded in gm_enhanced.prn?

Cheers.

Yes they are in gm_enhanced.prn, but the enhanced scan tool data is restricted by the manufacturer and we are not allowed to disseminate that info. But if you have another source for that info then you can fairly easily add your own PIDs.

Regards
Paul

[Blacky]

Can you resend this to my email: paul@efilive.com that way it will get into the development cycle.

Regards
Paul

Also please: Parameters such as TUTD Options: Disabled/Enabled, Direct/Serial, Range Select Enabled/Disabled, Active Range. Ability to select function of each of the forward 4 manual shift positions.

And TCC PWM/Pressure/Torque Parameters.

Would guess you got plenty of very market relevant feedback at SEMA.

Cheerz.

[GMPX]

The T43 controller was designed by aliens, no human could possibly design code so complex!

We have not been flooded with requests for greater tuning controls on the T43, in fact the opposite, however, I am aware that HPT released an update that contains some tables that has sparked some interest of what some further control might allow.

I will be back on the T43 soon because there is still some unsupported 2009 model TCM's we need to finish off.

Cheers,
Ross

[Josh61513]

Surely an alien, or least an engineer with a healthy budget!

Just what I was hoping to hear, Ross. Any idea if "soon" means a week, a month, or ? If you want to release the new tables via beta I would be happy to test. We have two T43s (FWD Saturn Aura 6T70, and RWD Yukon Denali 6L80).

Thanks for the continued support, EFI crew.

Josh

[PSWired]

Just chiming in to let you guys know there is definitely interest in T43 support. For me, 2009 OS support is the #1 request, followed by the ability to define the forward range select actions. Thanks!

[gmh308]

The T43 controller was designed by aliens, no human could possibly design code so complex......

Cheers,
Ross

Aliens and quantum physics?

Sounds like GM found that mathematically modelling what was once the domain of lots of little pistons, springs, the valve body, a stack of check valves and oil to operate a simple set of clutches in an average way aint that easy after all . An impressive result really.

[Alex(AUS)]

I for 1 have been requesting A6 support (like HPTuners) for quite a while ... I also know of 3 other Efilive users that are in the same boat ... Can we at least get an ETA on the updates?

Thanks,

Alex

[Blacky]

I for 1 have been requesting A6 support (like HPTuners) for quite a while ... I also know of 3 other Efilive users that are in the same boat ... Can we at least get an ETA on the updates?

Thanks,

Alex

Do you mean extra tables for tuning/calibrating or do you mean extra PIDs for data logging?

Regards
Paul

[Alex(AUS)]

Do you mean extra tables for tuning/calibrating or do you mean extra PIDs for data logging?

Regards
Paul

Both.

Alex

[Blacky]

Updated/additional PIDs should be available in the next release, before Christmas. Updated tables will probably not be available before Christmas.

Regards
Paul