Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: start problem with cammed c6zo6

  1. #1
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default start problem with cammed c6zo6

    my fuel trims after start are really good.start spark is 20,idle spark is 21 ish.problem im having is right after it pops off it dies,it seems as if it doesnt flare long enough.Anyone else have these issues?
    This system is totally different then the standard ls based stuff,doesnt reley on ve to make run right,almost seems like its all in the maff transfer function.

    wot is great,as its made 572 with a cam and long tubes only.

  2. #2
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default

    ANyone,need help asap!!!!!!

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Erick, welcome to the forum...

    Post your tune file (and any log files) and someone will look at it.

    List your vehicle/mods.

  4. #4
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default

    I just need to know where to go to dial in the startup.the rest of the tune is good.idel is cherry at 900 and my trims are within 1% to the rich side with a 12.7 wot.


    car has stock heads,248 254 113 cam in the low 600 lift range.

  5. #5
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default

    Anyone,please,ive got the whole darn car done othen then this stupid start issue,im not looking for someone elses tune,i just need to know what files i should be looking at to get this sucker wrapped up.Thanks

  6. #6
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Default

    Quote Originally Posted by joecar View Post
    Erick, welcome to the forum...

    Post your tune file (and any log files) and someone will look at it.

    List your vehicle/mods.
    chrleb2, I'm sure there are many here that would like to help, but if you're not going to provide the information people need, they can't do too much. Post your tune file and logs so we can see what is going on.

    Simon.

  7. #7
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default

    well i figured it out.I dont want to post my files,nor do i want others to post there files.i just needed just a nudge in the right direction,what files to change to make this car start,but i got it handled.thanks

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What was it...?

  9. #9
    Junior Member chrleb2's Avatar
    Join Date
    Jan 2008
    Posts
    47

    Default

    in the main spark table there is a cranking spark,gave it a extra 10 degrees for a total of 20 and took off the flare control,starts PERFECT.

    Just working on one last little issue,has some low speed tip in issues but cant find a tip in table at all,im telling you chevy went out of there way to ruin a good thing with this fucking computer.The early ls stuff works so good and is so easy,this system seems to be not so tuner friendly.But im getting it.

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    I'm not surprised... GM's wrist doesn't know what it's hand is doing.

Page 1 of 2 12 LastLast

Similar Threads

  1. Warm Start Problem
    By bobbycollier in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: April 7th, 2009, 01:16 PM
  2. Lean Cold Start Problem
    By swingtan in forum E37, E38 & E67 PFI ECM's
    Replies: 29
    Last Post: May 14th, 2008, 11:52 AM
  3. Lean Start Problem with pre-2003 OS
    By hpcubed in forum Custom Operating Systems
    Replies: 0
    Last Post: April 1st, 2008, 11:54 AM
  4. Need help with cammed LS2 (getting codes)
    By black346 in forum Gen IV V8 Specific
    Replies: 4
    Last Post: October 31st, 2007, 11:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •