Option Text not Found

[Jason S.]

When trying to select the PID's on the V2 It just flashes (very quickly....too quickly) Options text not found, and goes back to the main screen. What am I missing here?

[joecar]

Options.txt is located here: C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config

Using EFILive Explorer (EE) copy Options.txt from that folder (upper pane) to the Config tab (lower pane)...

and also copy the .pmm file for your PCM/ECM.

[Jason S.]

Options.txt is located here: C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config

Using EFILive Explorer (EE) copy Options.txt from that folder (upper pane) to the Config tab (lower pane)...

and also copy the .pmm file for your PCM/ECM.

O.k. That seemed to get me to the list of .pmm's but when I select my .pmm file it just flashes back to the top of the list. Do I need to be connected to the vehicle for this?

[nevinsb]

The V2 should not be connected to the vehicle while doing that.
Try to format the config area with the EFILIVE explorer, then copy all the files in the top pane down to the bottom again.

What version of Firmware/bootloader are you running?

[Jason S.]

The V2 should not be connected to the vehicle while doing that.
Try to format the config area with the EFILIVE explorer, then copy all the files in the top pane down to the bottom again.

What version of Firmware/bootloader are you running?

Bootblock 2.06.02, firmware 2.06.05

I did all the transfer off line. I was referring to selecting the vehicle for the PID's, does the vehicle need to be connected for that? I'll try reformatting and reselecting.

Edit: Reformatting seemed to take care of the selection issue! Thanks!!!!

[nevinsb]

I don't think I have ever tried selecting the PID list without the PCM connected. Give it a try with the PCM connected and see if it works.

I would try to confirm your issue, but I don't have a USB cable with me.

[Jason S.]

I don't think I have ever tried selecting the PID list without the PCM connected. Give it a try with the PCM connected and see if it works.

I would try to confirm your issue, but I don't have a USB cable with me.

After reformatting the config section, it allowed me to select my vehicle. So that took care of that!

Thanks!

[mr.prick]

Bootblock 2.06.02, firmware 2.06.05

I did all the transfer off line. I was referring to selecting the vehicle for the PID's, does the vehicle need to be connected for that? I'll try reformatting and reselecting.

Edit: Reformatting seemed to take care of the selection issue! Thanks!!!!

there is a newer build (77) and firmware (2.06.06) as of 12-14-08.

[nevinsb]

Everyone at work must be surfing the internet. That download is going slow

[mr.prick]

it was some what slow for me too.
but i had build (75) installed before this latest one (77).