Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Pic of my setup.

  1. #1
    Lifetime Member
    Join Date
    Jun 2005
    Posts
    296

    Default Pic of my setup.

    Here is a pic of the twin turbo setup I built for those interested. It is not the best pic, but you get the picture!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	dvc00906.jpg 
Views:	301 
Size:	104.7 KB 
ID:	183  
    '71 chevelle
    Twin turbo ls1
    1000 HP 93 octane street car!
    96 lb injectors

  2. #2
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    607

    Default

    Cool........

    Bill
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  3. #3
    EFILive Reseller kbracing96's Avatar
    Join Date
    Sep 2005
    Posts
    584

    Default

    When your tuning skills catch up to your fab skills, your going to have one bad ass setup . Nice work! :wink:
    01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC

    Custom KBracing front mounted, BW S480, intercooled turbo


  4. #4
    Senior Member
    Join Date
    Oct 2003
    Posts
    140

    Default

    Looks great, very clean! Is this a strip car, or just no air filters yet?

  5. #5
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default



    What kind of ponies are you shooting for???

    Cheers,
    joel

  6. #6
    Lifetime Member Scoota's Avatar
    Join Date
    Mar 2005
    Posts
    241

    Default

    Nitrorocket,
    It takes years of experience to become a good tuner, be patient with yourself in your learning curve, combine your skills and the ability to tune and you will produce a great product.

    Looks great.

    Cheers Scotty.
    It's a lot easier to ask for forgiveness than it is to ask for permission.



  7. #7
    Lifetime Member
    Join Date
    Jun 2005
    Posts
    296

    Default

    Thanks for the compliments. I just won second place at a show. I lost to a car with no turbos at all, go figure.

    I am guessing it can make as much power as I want, probably up to about 1000 rwhp max. It is about a serious a ls1 setup as one can build.

    Since I do not race( I only run the strip about twice per year) I will not lean on it very hard. I am going to try about 16-17 psi on pump and see how I like it. That is probably about 750 rwhp. I really don't care what kind of power it makes as long as it puts a smile on my face. I made about 500 rwhp last year with my N/A 427 small block. So 50% more power should be plenty quick. If I can drop 1 second from last year, I will finally have a 9 second car. As long as my tuning goes good!
    '71 chevelle
    Twin turbo ls1
    1000 HP 93 octane street car!
    96 lb injectors

  8. #8
    Member ace68's Avatar
    Join Date
    Jun 2004
    Posts
    97

    Default

    Where did you get the headers, did you make them? Nice job!

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Nitro, you're doing well and you're learning a lot quickly (I noticed that you're answering other people's questions on 2/3bar MAP sensors etc,
    cool, way to go mate :2 thumbs up.

    You do very nice welding on stainless (which is difficult to do);
    do you got more pics of your Chevelle (engine bay and underneath)...?

    Ha ha, you don't really care too much how much power it makes, as long as it gets you into the [low] 9's, and it will put a smile on anyone's face;
    when you make that much power, why care about how much power it makes (...sort of like money, it's sufficient enough...).

    8)

    Power rules the world,
    Cheers
    Joe
    :chugging beer: :peeling tyres:

  10. #10
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    AWESOME setup!

    I like!
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

Page 1 of 2 12 LastLast

Similar Threads

  1. RR Setup
    By Harrismarine in forum RoadRunner Real-Time PCM Emulator
    Replies: 29
    Last Post: May 12th, 2009, 03:25 AM
  2. LC1 setup for e85 ?
    By yellowC6ohio in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 13th, 2008, 04:11 AM
  3. Need Help with E-fan setup....
    By MrZ71man in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: October 21st, 2007, 09:17 AM
  4. What is the best way to setup PE VS RPM?
    By BowlingSS in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: August 2nd, 2005, 03:33 PM
  5. 2 bar map setup
    By AGRO in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: June 12th, 2005, 04:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •