lt1 runs on ls1 computer using modded OPTI

[akafred]

got the car running on the ls1 computer today... i repinned the lt1 harness into the connectors and addded the in the coil wires and made a custom wheel for the opti.

i was worried at first as it would barely stay running then i pulgged in the other coil harness and it runs like a champ now..

dont mind the smoke there was some antifreeze on the downpipes.

http://www.youtube.com/watch?v=btAtQtIe3LY

[joecar]

akafred, good job...

[s10mods]

are you using the 4x crank sensor or the 24x from eficonnection?

[akafred]

this only uses a modified opti and runs 8 coils, using a 411 pcm

[s10mods]

what are you using for a tune? how does the 4x cranx sensor run the 8 coils?

[akafred]

its running on a stock ls1 tune right now. i need to turn off the rear o2's as i dont have any and i need to set the injector banks.

again this runs only on a modified opti.. it puts out the 24x signal and the cam signal

[s10mods]

so is the cam siginal sending both the cam and crank siginals?

[akafred]

the modified opti is sending both signals

[s10mods]

cool, so is that still the opti pick up sensor and just a modified opti wheel?

[akafred]

its a modified pickup and modified wheel