Results 1 to 6 of 6

Thread: Can't change from Lambda to EQ Ratio or AFR

  1. #1
    Lifetime Member
    Join Date
    Jun 2007
    Posts
    203

    Default Can't change from Lambda to EQ Ratio or AFR

    I haven't done anything with EFI sine I updated with all of the newest downloads. ANyhow, I was going to do some data logging and I see that some of my PE modifiers are in Lambda Units, so I tried to change them to EQ and the Tuning program still says the units are Lambda.

    Am I missing something here?

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Have a look at this tutorial which shows how to change display units for tables: http://download.efilive.com/Tutorial...ay%20Units.htm

    There are also the default display unit under the Properties section in the Tune Tool.
    Andrew
    EFILive Crew


  3. #3
    Lifetime Member
    Join Date
    Jun 2007
    Posts
    203

    Default

    Thanks. I had looked at those and changed the unit but it was not reflected on the unit identifier in the tune file. For some reason it is now working and the units are EQ Ratio. I have no idea why it wasn't working or started working, but I can live with it. It's working now.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    After changing units you may have to restart the tunetool.

  5. #5
    Lifetime Member
    Join Date
    Jun 2007
    Posts
    203

    Default

    Thanks. That's probably why the units changed. I was getting frustrated knowing I had changed the units but the change was not reflected in the tunes. It might be helpful if those little tidbits were in the tutorials/documentation.

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ok, I'll follow that up to have the docs mention that.

Similar Threads

  1. lambda vs a/f
    By minytrker in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 22nd, 2009, 09:12 AM
  2. How do you log WBO2 lambda instead of AFR?
    By waveoff in forum General (Petrol, Gas, Ethanol)
    Replies: 16
    Last Post: August 13th, 2009, 07:03 AM
  3. PE modifer based on RPM Lambda
    By SHOGOR in forum Gen III V8 Specific
    Replies: 1
    Last Post: July 19th, 2008, 04:57 AM
  4. Diff. Ratio Change - Speedo Adjustment
    By Acer in forum Gen IV V8 Specific
    Replies: 0
    Last Post: December 9th, 2006, 05:13 PM
  5. Lambda
    By turbo lcc in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 13th, 2006, 02:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •