When i apply the fan patch, i can't see any values below 192*F. Can someone please enlighten me as to what i'm doing wrong.
Thanks.
When i apply the fan patch, i can't see any values below 192*F. Can someone please enlighten me as to what i'm doing wrong.
Thanks.
Paul was going to fix that problem in the tune tool... I think he might have missed it off his "to do" list
It works, but you cant see the correct new numbers. Maybe ping support@efilive.com a email about it. I have the same problem.
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
Weird thing is, the first time I ever applied it, it worked. The two tunes following, does not reveal the lower temp tables.
I have no idea how to scale the fans for lower temps when I can't see the tables.
From an earlier post:
Follow the normal process to apply the patch.
Then open G0901. The first vaue is still 89'C, but it repesents a value about 9'C lower.
If you want to activate the fans at 90'C, then change the % in the 99'C label.
You might have to play with values to get the desired values.
2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop
Get EFILive in europe (http://www.efilive.eu).
2007 Escalade ESV L92 6.2L VVT.
2014 VF SV LS3 Maloo.
No, you're not out of luck.
It should work fine. The patch is applied and you're good to go. Just the labels on the table are not showing the correct values. As Izak said, after the patch is applied, "assume" the labels are correct.
I will fix it in the next update its now on the whiteboard so it can't get forgotten again.
Paul
Before asking for help, please read this.
After the patch is applied, the labels should be assumed to displayed as:
Degrees C:
76,78,81,84,87,90,92,95,98,101,104,106,109,112,115 ,118,121
Degrees F:
168,172,177,183,188,194,197,203,208,213,219,222,22 8,233,239,244,249
Regards
Paul
Before asking for help, please read this.