E38 Fan Patch issue.

[johnsZ06]

When i apply the fan patch, i can't see any values below 192*F. Can someone please enlighten me as to what i'm doing wrong.

Thanks.

[ringram]

Paul was going to fix that problem in the tune tool... I think he might have missed it off his "to do" list
It works, but you cant see the correct new numbers. Maybe ping support@efilive.com a email about it. I have the same problem.

[johnsZ06]

Weird thing is, the first time I ever applied it, it worked. The two tunes following, does not reveal the lower temp tables.

I have no idea how to scale the fans for lower temps when I can't see the tables.

[izaks]

From an earlier post:

Follow the normal process to apply the patch.
Then open G0901. The first vaue is still 89'C, but it repesents a value about 9'C lower.
If you want to activate the fans at 90'C, then change the % in the 99'C label.
You might have to play with values to get the desired values.

[ringram]

Weird thing is, the first time I ever applied it, it worked. The two tunes following, does not reveal the lower temp tables.

I have no idea how to scale the fans for lower temps when I can't see the tables.

Yep, I bet you upgraded the software between those 2 times too

[johnsZ06]

So I'm SOL I guess?

[Blacky]

So I'm SOL I guess?

No, you're not out of luck.

It should work fine. The patch is applied and you're good to go. Just the labels on the table are not showing the correct values. As Izak said, after the patch is applied, "assume" the labels are correct.

I will fix it in the next update its now on the whiteboard so it can't get forgotten again.

Paul

[Blacky]

After the patch is applied, the labels should be assumed to displayed as:

Degrees C:
76,78,81,84,87,90,92,95,98,101,104,106,109,112,115 ,118,121

Degrees F:
168,172,177,183,188,194,197,203,208,213,219,222,22 8,233,239,244,249

Regards
Paul

[johnsZ06]

After the patch is applied, the labels should be assumed to displayed as:

Degrees C:
76,78,81,84,87,90,92,95,98,101,104,106,109,112,115 ,118,121

Degrees F:
168,172,177,183,188,194,197,203,208,213,219,222,22 8,233,239,244,249

Regards
Paul

I see. So I need to transpose the current temp figures for the ones above.

Cool. That was easy.

Thank you kind sir.

[gmh308]

After the patch is applied, the labels should be assumed to displayed as:

Degrees C:
76,78,81,84,87,90,92,95,98,101,104,106,109,112,115 ,118,121

Degrees F:
168,172,177,183,188,194,197,203,208,213,219,222,22 8,233,239,244,249

Regards
Paul

Thankyou sir!

Had previously noticed that fan 1 turned on at about 45%, fan 2 @ 90%. Is this still the same with the expanded scale?