dsp5 problem

[brandon04lb7]

hey guys i just installed the dsp5 switch on my truck, and i ran a full flash when i reprogramed the ecm, but when i press on the pedel except on 1 and 5 witch are stock tunes, it doesnt do anything, i can hear it idle a lil differnt but thats about it, any ideas?

[GMPX]

Might seem like a obvious question, but did you populate all the other tables in the DSP area's?

Cheers,
Ross

[brandon04lb7]

u mean put a modify a tune into them? sorry im not very good at efi live yet

[GMPX]

Send your DSP5 tun file to support@efilive.com, I'll sort it out for you. Might take a day before it finds it's way to me.

Cheers,
Ross

[brandon04lb7]

got it all worked out, thanks gmpx

[dt.2448]

got it all worked out, thanks gmpx

What was the problem? I'm having issues also

[dt.2448]

What was the problem? I'm having issues also

I didn't do a Full Flash. I got her now though
Thanks to Nick (at 11pm on a sat night) thats customer service!

[mike37davis]

first off hello everyone...happy new year...my truck just recently started acting up...it will start just fine andrun for 10-12 seconds then die....will turn over but not fire for 5-10 min. checked diag. and no codes cames any info. would be greatly appreciated..thanks

[joecar]

mike37davis, welcome and Happy New Year...

[vortecfcar]

first off hello everyone...happy new year...my truck just recently started acting up...it will start just fine andrun for 10-12 seconds then die....will turn over but not fire for 5-10 min. checked diag. and no codes cames any info. would be greatly appreciated..thanks

Mike,

Do you have EFILive? If so, you might try logging the truck as it runs and stalls to help diagnose the source of the stall. Usually something like this is fuel system related, possibly losing prime.

Nick

ps- next time, I'd recommend starting a new thread