Results 1 to 3 of 3

Thread: e38/t43 commanded idle issue

  1. #1
    Member
    Join Date
    Apr 2006
    Posts
    75

    Default e38/t43 commanded idle issue

    got a car that has a commanded idle issue. its a 70 implala swap with a current performance harness

    in park the commanded idle follows the in p/n idle table when you shift it into gear it goes to 896 rpm commanded no matter what you set idle speed in gear at,

    car came from another person whe chopped all the tables up chasing the issue and the first thing i noticed was the commanded idle rpm problem

    any thoughs

    thanks

    Log_0000.efi
    base_0010.ctz

  2. #2
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    Someone has "tuned" it using HPT. Would recommend beginning with a stock tune, and making your own adjustments.

    Below is a JPEG of the Idle table that is causing the issue ...

    Click image for larger version. 

Name:	2013 Camaro E38 - in gear idle issue.jpg 
Views:	237 
Size:	185.0 KB 
ID:	18193

  3. #3
    Member
    Join Date
    Apr 2006
    Posts
    75

    Default

    Is there a cax for that table? Or can you just set it all to 750. This car was tuned somewhere else and I really don't want to be married to this car. Just trying to help out a freind.

Similar Threads

  1. T43/E38 Scaled Shifting
    By Webbs in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 16
    Last Post: September 17th, 2015, 01:09 AM
  2. T43 Autocal V2 Licensing Issue and knowledge confirmation.
    By TBMSport in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 3
    Last Post: March 27th, 2014, 09:44 AM
  3. AutoVE commanded AFR issue
    By ttls1 in forum General
    Replies: 12
    Last Post: November 29th, 2013, 11:28 PM
  4. Commanded PE AFR Issue
    By nm2769 in forum Gen III V8 Specific
    Replies: 1
    Last Post: July 9th, 2008, 11:10 AM
  5. Wont go PE when commanded E38
    By 4wheelin in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: October 18th, 2007, 11:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •