I had my SVO 30# Injectors flowed today so I can dial in my IFR table.
The final results are attached to the thread. The flow numbers are in ML so they must be divided by 10.5 to find the Lbs/Hr rating.
Ultimately it looks like the injectors are actually rated at 43.5 PSI mine flow 31 Lbs/Hr at 43.5 PSI.
It's still a good idea to have YOUR injectors flowed so you know where to place them. But this should be a good guideline for the red top SVO 30# injector.
For those that need help with calculating the IFR - Here is how it works.
My least flowing injector runs 330ml/hr or 31.4lbs/Hr @ 43.5 PSI.
Using the injector IFR spreadsheet here (http://www.marcintology.com/tuning/injectors.xls)
You would enter the following:
Injector Rated Fuel Pressure: 43.5
Your Fuel Rail Pressure: 58
Injector Rated Flow Rate: 31.4
And the result will be:
4.568457
4.596929
4.625226
4.653351
4.681306
4.709096
4.736723
4.764189
4.791498
4.818653
4.845655
4.872507
4.899213
4.925773
4.952191
4.978469
5.004609
G/Sec
These are my results, yours may vary.