timing bouncing in maf only tune

[joecar]

Joe the attachments manager keeps saying invalid file. I am looking in v8.1 Is this correct?

Rename Options.ini to Options.ini.txt and attach that.

[5.7ute]

Post your Options.txt file... we'll edit it so to include DYNCYLAIR_DMA.

Doesnt he need GM.CYLAIR_DMA as he is using the maf only?

[Aint Skeered]

still saying invalid file.


I had to name it that but it was Options configuration settings before. It did not say Options.ini

[Aint Skeered]

One more question , in the 98 pid list it shows in my options ini to have GM.CYLAIR_DMA

I am going to copy and paste my options for 98 ls1 and 99+ ls1=; __________________________________________________ _______________________
*PSL_98
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, ECT, -40:110:1:1:0
;PCM, FUELSYS
PCM, CYLAIR_M
PCM, DYNCYLAIR_M
PCM, IAT
PCM, LONGFT1
PCM, LONGFT2
PCM, EOPS
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, SPARKADV
PCM, TP
PCM, VSS
PCM, AFR
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, KR
PCM, MAFFREQ
-, WO2ST1
-, WO2ST2
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2

; __________________________________________________ _______________________
*PSL_LS1
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, ECT, -40:110:1:1:0
PCM, FUELSYS
PCM, IAT
PCM, LONGFT1
PCM, LONGFT2
PCM, EOPS
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, SPARKADV
PCM, TP
PCM, VSS
PCM, AFR
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, KR
PCM, MAFFREQ
-, WO2ST1
-, WO2ST2
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2

; __________________________________________________ _____

(

[Aint Skeered]

Now, Could I just log from the 98 pid list?

[Aint Skeered]

| |
; | Copyright © 1999-2007 |
; | EFILive Limited |
; | web: http://www.efilive.com |
; | email: info@efilive.com |
; |_________________________________________________ ______________________|
;
; Modifications
; __________________________________________________ _______________________
; Version | When | Who | Why
; __________________________________________________ _______________________
; 8.0 | 2007-Feb-16 | PSB | Created file
; __________________________________________________ _______________________
;
; __________________________________________________ _______________________
*PID_SELECTIONS
;
;PID selection list
;-------------------
;
; Cap1 and Cap2 form the "on-screen" display option from which the user may select.
; Controllers lists 1 or 2 "&" seperated pid memory map (*.pmm) files.
; PSL is the PID Selection defined later in this file
; PCU is the PID Custom Units defined later in this file
;
;Cap1 Cap2 Controllers (Engine&Trans) PSL PCU
;------- -------- -------------------------- ---------- --------
LS1 98, Manual, LS1A_M.pmm, PSL_98, PCU
LS1 98, Auto, LS1A_A.pmm, PSL_98, PCU
LS1 99+, Manual, LS1B_M.pmm, PSL_LS1, PCU
LS1 99+, Auto, LS1B_A.pmm, PSL_LS1, PCU
P10, Manual, P10_M.pmm, PSL_LS1, PCU
P10, Auto, P10_A.pmm, PSL_LS1, PCU
P12, Manual, P12_M.pmm, PSL_LS1, PCU
P12, Manual, P12_A.pmm, PSL_LS1, PCU
E40, Manual, E40.pmm, PSL_LS2, PCU
E40, Auto, E40.pmm&T42.pmm, PSL_LS2, PCU
E38, Manual, E38.pmm, PSL_LS2, PCU
E38, Auto, E38.pmm&T43.pmm, PSL_LS2, PCU
E67, Manual, E67.pmm, PSL_LS2, PCU
E67, Auto, E67.pmm&T43.pmm, PSL_LS2, PCU
LB7, Manual, LB7.pmm, PSL_LB7, PCU
LB7, Auto, LB7.pmm&AL5.pmm, PSL_LB7, PCU
LLY, Manual, LLY.pmm, PSL_LB7, PCU
LLY, Auto, LLY.pmm&AL5.pmm, PSL_LB7, PCU
LBZ, Manual, LBZ.pmm, PSL_LBZ, PCU
LBZ, Auto, LBZ.pmm&AL5.pmm, PSL_LBZ, PCU
LMM, Manual, LMM.pmm, PSL_LBZ, PCU
LMM, Auto, LMM.pmm&AL5.pmm, PSL_LBZ, PCU

; __________________________________________________ _______________________
;
; PID Selection List
; ----------------------
;
; Node: Is one of PCM, ECM or TCM (use "-" for external PIDs).
; PCM = Powertran controller, engine and trans combined into one controller.
; ECM = Dedicated engine controller only.
; TCM = Dedicated transmission controller only.
;
; If you are unsure whether to use ECM or PCM, use PCM. PCM will match both ECM and PCM.
; The Node specified from which controller the PID will be retrieved.
; i.e. ECM-RPM v's TCM-RPM.
;
; PIDs: Is one or more "|" seperated PID names. The first valid PID will be used.
; Alarm: Is 5 ":" seperated fields:
; min: Minimum value, below which the alarm will sound.
; max: Maximum value, above which the alarm will sound.
; style: Is one of:
; 0 = No sound, No LEDs
; 1 = Low pitch
; 2 = Medium Pitch
; 3 = High Pitch
; 4 = Very high Pitch
; 16 = Illuminate LED 1
; 32 = Illuminate LED 2
; 48 = Illuminate LED 3
; 64 = Illuminate LED 4
; 128 = Illuminate LED 5
; Add Pitch and LED values together to enable audio and visual alarms.
; For example, for Medium Pitch and LED 4, use 2+64 = 66
; time: Time (in 10ms increments) for which alarm will be sounded.
; hold: Time (in seconds) for which the displayed value will be frozen (not implemented yet).
;
; __________________________________________________ _______________________
*PSL_98
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, ECT, -40:110:1:1:0
;PCM, FUELSYS
PCM, CYLAIR_M
PCM, DYNCYLAIR_M
PCM, IAT
PCM, LONGFT1
PCM, LONGFT2
PCM, EOPS
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, SPARKADV
PCM, TP
PCM, VSS
PCM, AFR
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, KR
PCM, MAFFREQ
-, WO2ST1
-, WO2ST2
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2

; __________________________________________________ _______________________
*PSL_LS1
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, ECT, -40:110:1:1:0
PCM, FUELSYS
PCM, IAT
PCM, LONGFT1
PCM, LONGFT2
PCM, EOPS
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, SPARKADV
PCM, TP
PCM, VSS
PCM, AFR
PCM, HO2S11
PCM, HO2S21
PCM, IBPW1
PCM, IBPW2
PCM, KR
PCM, MAFFREQ
-, WO2ST1
-, WO2ST2
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2

; __________________________________________________ _______________________
*PSL_LS2

;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
ECM, ECT, -40:110:1:1:0
ECM, FUELSYS
ECM, IAT
ECM, LONGFT1
ECM, LONGFT2
ECM, MAP
ECM, RPM, 0:6500:2:1:0
ECM, SPARKADV
ECM, TP
ECM, VSS
ECM, AFR_B|AFRATIO_M
ECM, HO2S11
ECM, HO2S21
ECM, INJPWB1
ECM, INJPWB2
ECM, KNKRET
-, WO2ST1
-, WO2ST2
-, WO2LAM1
-, WO2LAM2
-, WO2AFR1
-, WO2AFR2
; T42 4/5 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR

; __________________________________________________ _______________________
*PSL_LB7

;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, TP
PCM, ECT
PCM, IAT
PCM, MAF
PCM, RPM
PCM, VSS
PCM, BARO2
PCM, BOOST_M
PCM, FRPACT
PCM, FRPDES
PCM, FUELQ_MAIN_M
PCM, MAINBPW
PCM, MNINJTIM
PCM, PIINJTIM
PCM, PILOTRATE
; Allison 5 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR
TCM, TRQENG_B

; __________________________________________________ _______________________
*PSL_LBZ

;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
ECM, BARO
ECM, ECT
ECM, FRP_C
ECM, IAT
ECM, MAF
ECM, MAP
ECM, RPM
ECM, VSS
ECM, FRPDES
ECM, MAIN1Q_M
ECM, MAIN1T_M
ECM, MNINJTIM
ECM, PILOT1Q_M
ECM, PILOT1T_M
ECM, TCVPOS
; Allison 6 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR
TCM, TRQENG_B

; __________________________________________________ _______________________
;
; PID Custom Units
; ----------------------
;
; PCU specifies the controller and PID for which to define a custom unit
; Caption is the caption displayed on screen during BB logging (8 characters maximum).
; Prec is the number of decimal places to display
; Units is the display units name.
; Op is the operator, one of:
; * = multiply
; / = divide
; i = invert_then_multiply
; The metric value of the PID is multiplied, divided or inverted then multiplied by Factor.
; Offset is then added.
;
; __________________________________________________ _______________________
*PCU
;
; PID Caption Prec Units Op Factor Offset
; -------- -------- ---- ----- -- ------------- -------------
PCM,ECT, Coolant, 0,°F, *, 1.8, 32.0
PCM,MAP, M'Fold, 1,psi, /, 6.894757,
PCM,VSS, Speed, 0,mph, /, 1.609344,
PCM,SPARKADV,Spark
PCM,IAT, Intake, 0,°F, *, 1.8, 32.0
PCM,MAF, AirFlow, 1,lb/m, /, 7.559873,
PCM,TP, Throttle
PCM,KR, Knock
-, T1, T1, 1,°F, *, 1.8, 32.0
-, T2, T2, 1,°F, *, 1.8, 32.0







THis is my full options.ini I am going to check back later and did not want to not have the right thing posted. Thanks for any help guy's

[5.7ute]

I would just replace the EOPS pid with the CYLAIR_M pid & go from there.

[joecar]

Doesnt he need GM.CYLAIR_DMA as he is using the maf only?

Oh, I meant which ever one is indexing the spark tables.

[Aint Skeered]

I would just replace the EOPS pid with the CYLAIR_M pid & go from there.

Is it as simple as deleteing the EOPS pid and copy and paste it from the 98 pid list?

[5.7ute]

Is it as simple as deleteing the EOPS pid and copy and paste it from the 98 pid list?

That is all I did to add the manvac & battery voltage pids to my V2 so it should work fine. So instead of PCM, EOPS you will have PCM, CYLAIR_M
Then save the options file & reconfigure your V2 with the new file.