How do i seleect wich ones i want to log on the v2 there are alot of pids tht dont come up on the v2 tht i can see when logging with the my lap top Thanks This is alos for a 07.5 lmm
How do i seleect wich ones i want to log on the v2 there are alot of pids tht dont come up on the v2 tht i can see when logging with the my lap top Thanks This is alos for a 07.5 lmm
any one
C:\Documents and Settings\All Users\Application Data\EFILive\V8\Config\Options.txt
this must be edited for the PIDS you want.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
See the "PCU" section ("From" "To" near the end) of my Options.txt (attached)...
With those conversion parameters, with each press of the ENTER key, the display of those mentioned pids swaps between metric and imperial.
Im not understanding the PSL thing.
Some have 2 PSL #s and some have 3.
If I create a new Pid selection like balance would It be PSL23 and PSL24 from the default options.txt file?
I guess I just need a little better explaining of the PSL part, lol.
12 Second LMM
The identifiers after the PSL are the positions in the list of pid lists...
In the attached Options.txt you will see:
- the first PSL lists PSL_01 and PSL_02 -> refers to rows 1 and 2 in the pid selection list ("LS1A_M" and "LS1A_A");
- the second PSL lists PSL_03 and PSL_04 -> refers to rows 3 and 4 ("LS1B_M" and "LS1B_A");
- *PSL,PSL_09,PSL_11,PSL_13 -> refers to rows 9, 11, 13.
and so on...
a PSL may be used by 0 or more pid list positions.
See the comment from the Options.txt file:
Code:; _________________________________________________________________________ ; ; PID Selection List ; ---------------------- ; ; *Section_Names is a comma separated list of indexes from the initial *PID_SELECTIONS section above. ; The XX in PSL_XX matches the entry number in *PID_SECLTEIONS ;
Last edited by joecar; January 17th, 2009 at 07:37 PM.