Spent the day at the dyno. We tried to use autoVE with EFI 7.5.5 V1.2 to log and tune. The car would lose power during the runs after 4500 RPM. We tried to determine why but the log seemed to lock up during the most important times. We ran several runs and had the same problem every time.
After 7+ tries, we stopped logging and it appeared that the data could be monitored. When logging - the dashboard would freeze for a while (5+ sec.) versus when monitoring it appears smooth.
Attached is an example. There is almost 10 seconds between frame 157 and 158. Anyone have a theory or tell me what I am doing wrong. I have less than 24 PIDS.