When I setup an alarm for instance ECT:
Does the value I put in have to be in *C or *F?
If I press enter on the V2 and view data in *F, will the alarm switch to read *F or still *C temps.
When I setup an alarm for instance ECT:
Does the value I put in have to be in *C or *F?
If I press enter on the V2 and view data in *F, will the alarm switch to read *F or still *C temps.
12 Second LMM
It has to be in metric units °C...
pressing ENTER (to display imperial units °F) only changes the display... the alarm will still work correctly as it is based on metric units.
Thanks. I was in the middle of testing, but you responded before I finished, lol.
Heres another,
I selected to light 1st LED and sound mid tone, (i added the numbers together) but all I get is the tone, no light. I then tried another LED and a higher pitch, and it only toned for the time I setup, then wouldnt do it again until I reconnected?
12 Second LMM
There is an option in the V2 setup options for LED Mode...
LED Mode is "status" by default, you have to set it to "alarm" (or something).