Changing gauge range

[VYsupersix]

Hi, is there any way to change the range that is shown on the dashboard gauges using V4 evaluation? I want to change the MAF range from 0-300g/s to something more like 0-4000 g/s. With the supercharger the gauge maxes out with about 1/4 throttle.Thanks.

[Blacky]

You can edit the vehicle data stream and set the limits for the MAF display. However, if the MAF is only able to register airflow to 300g/s then setting the display limits to 4000 will not make the MAF able to sense air flow higher than that limit.

Regards
Paul

[VYsupersix]

Thanks for that, got it changed to a higher value and works fine