Quote Originally Posted by GMPX
Quote Originally Posted by QUICKSILVER2002
1.Which VE column is used at 105kpa (boost VE or Main VE). Is it best to just keep the two columns 100% synchronized.

2.What happens when PE is enabled and EQ vs RPM table has a richer ratio than PE.vs RPM Does it always use the richer ratio or does PE override if it is enabled?
1. - Boost VE is used from 105kPa+. normal VE is from 100 - 105kPa.

2 - The richest should win.

Cheers,
Ross
Cool, so at 104 kpa you are 100% on the Main VE and at 106 kpa you are 100% on the boost VE (with interpolation always taking place within each one).