Results 1 to 7 of 7

Thread: Bosch E69 support? Please?!

  1. #1
    Member
    Join Date
    Dec 2008
    Posts
    52

    Default Bosch E69 support? Please?!

    Hey Ross, I have an '09 CTS 3.6DI that I'd like to fix a few things on, any chance I'll be able to do it with EFILive in the near future?

    It has a T43 also, I can pull the calibration out of it but EFILive says it's an unrecognized controller so I can't do anything with it. Obviously I can't even pull the calibration out of the ECM with what's currently in EFILive. I'd really like to work on both the ECM and the TCM, but I'd be happy with anything at this point. It looks like the "other" guys are close to supporting the E69, please don't make me use them, EFILive kicks #ss on that other software's interface! It also looks like Vector may be tuning the Cad ECM but there's no way I want to go that route either.

    Please tell me there's hope! The CTS is selling pretty well, I would think there would be enough market out there to make it worth while. There are a bunch of Sky and Solstice guys out there too that would probably appreciate the E69 support also. Not to mention G8's and the new Camaro.

    Thanks!
    Last edited by gmtech16450yz; January 22nd, 2009 at 04:02 PM.

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,806

    Default

    The answer can be found here -
    http://forum.efilive.com/showthread.php?t=8546

    In saying we aren't supporting the E69 isn't because we don't want to because it's Bosch, or it's a V6 or anything like that, we already had 2009 R&D planned out in 2008 and the DI ECM wasn't on the list. Does that mean we are working on support for Hyundai instead?, no of course not.

    Send your T43 file to support@efilive.com , not sure on a time frame to add it though.

    Cheers,
    Ross
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    Member
    Join Date
    Dec 2008
    Posts
    52

    Default

    Thanks for the reply, I sent the file... waiting and hoping!

    Thanks Ross.

  4. #4
    Member
    Join Date
    Dec 2008
    Posts
    52

    Default

    Hey I just noticed that the '08-'09 CTS T43 is listed in the supported vehicles list. Is that a mistake or does that mean the regular 3.6 and not the 3.6DI trans? If so are the trans calibrations that different?

  5. #5
    Member
    Join Date
    Oct 2008
    Posts
    83

    Default

    The CTS is an E69-4 and Vector isnt doing anything with it, I was when I was at Vector. Be very careful tuning that TCM if you are AWD!
    Chris White
    www.GTOShiftLight.com
    2006 Spice Red A4 GTO
    2009 3LZ Z06
    2012 Jeep SRT8
    2013 SRX Premium
    2013 XTS Platinum

  6. #6
    Member
    Join Date
    Dec 2008
    Posts
    52

    Default

    Nope, not AWD, I know better than that! (I've seen too many Denali AWD problems)

    Looks like I won't be able to do any tuning on this CTS for awhile anyway, ECM or TCM. :(

  7. #7
    Member
    Join Date
    Dec 2008
    Posts
    52

    Default

    Ross, did you get a chance to look at that T43 file I sent you? Just wondering if it looks like a quick job to get it into an update or if it looks like a lot of work? I can't imagine it would be that different than the '09 3.6 non DI T43 that you already support?

    Thanks! (fingers crossed)

Similar Threads

  1. BOSCH Fuel Injectors 0280155868
    By mr.prick in forum Gen III V8 Specific
    Replies: 23
    Last Post: October 1st, 2010, 01:30 AM
  2. Bosch-Suggestion for continuity-cal_link
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: July 27th, 2009, 02:20 PM
  3. IFR table for red 30# Bosch gen 3 injectors
    By bsomm in forum Gen III V8 Specific
    Replies: 2
    Last Post: April 1st, 2009, 12:05 AM
  4. Bosch ECM controller i.d.
    By forcefedjunkie in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: June 11th, 2007, 07:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •