Page 5 of 5 FirstFirst ... 345
Results 41 to 46 of 46

Thread: tuning out exhaust hiss

  1. #41
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    ok, I'm in now...

    I set the EGR to OFF. Now I'm in the MIN Vane table, and I see the values are all set to 2.5. So where should I change? I'm guessing the columns of 300 and 800rpm, but how much lower should I go, and how low on the Y-axis?

    THANKS!!!!
    Wally

  2. #42
    Junior Member
    Join Date
    Dec 2009
    Posts
    35

    Default

    duh, just re-read and got enough of my answer to try on my own Thanks!

  3. #43
    New Member
    Join Date
    Jan 2010
    Posts
    3

    Default

    So this may answer my own question, but my hiss is only tuned out "part time". It has a nice low rumble at idle but as soon as I put the truck in gear in goes straight to the hiss. My table is only zeroed to 300-1000 up to 10 mm3.

  4. #44
    Lifetime Member
    Join Date
    Jan 2008
    Posts
    1,169

    Default

    Extend that part of the table down to 20mm3 and that will take care of it.
    '07 TBSS, LS2, T42, 3SS, Black on Black on Black, Pretty much stock at the moment. EFILive will fix that

    '06 LBZ/Allison 6speed, EC, LB, 1LT, Leather
    Current Mods: EFI Live/ PTO High Idle Mod/ Factory Exhaust Brake / BD Full Bore/ TransGo Jr./ TTS Twin Lift Pumps/ MBRP 4" turbo back/ Custom air box mod/ BullyDog Outlook Monitor

    465hp/1008tq---7/25/09---Dyno Day Fast Specialties Tuning by ME

  5. #45
    Lifetime Member killerbee's Avatar
    Join Date
    Jan 2006
    Posts
    1,079

    Default

    ditto.

    When you go into gear, your fuel use increases 30% or so.
    Michael, Systems Engineer 04.5 D-max LLY, Phoenix, Arizona Email
    Custom Tuning Services
    DURAMAX/CUMMINS ECM's TCM's for sale, all years, 20% wholesale discount available
    EFILive's first VGT "Software Wastegate Tune"

  6. #46
    New Member
    Join Date
    Jan 2010
    Posts
    3

    Default

    Thanks guys....!!!

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. Possible PCM fault from Welding Exhaust
    By The Alchemist in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: March 28th, 2010, 07:52 PM
  2. Exhaust flames on over run
    By Tre-Cool in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: January 3rd, 2010, 05:11 PM
  3. Adding Turbo Hiss
    By Mad Maxx in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 20
    Last Post: February 24th, 2009, 09:55 AM
  4. LBZ exhaust temps
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: September 23rd, 2008, 09:24 AM
  5. Bimodal exhaust tuning knob?
    By leres in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: June 5th, 2007, 09:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •