No start tune?
What would be a safe tune to make that would cause the truck not to start? For example as an anti-theft tune. Obviously this would come into play for the DSP but since lbzs dont have that yet, I would like to learn how to make a tune like this for when it does.
07 El Bee Zee
Little faster than stock...
You could just make the pedal position to desired torque tables (B1115 & B1116) all very low, maybe 150. The truck will still run but will just crawl along.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Thats a good idea
07 El Bee Zee
Little faster than stock...
O do like I do when I leave my truck for a week or so I put in a tune that runs good but has a max speed of 3mph and a max rpm of 900,
2008 2500HD 4X4 LTZ Z71 6.6L LMM
Mods: EFILive, MBRP 4" DPF Delete, BD Manifold, SD Manifold, SD Center Link, SD Sleeves, S&B Intake, FS-2500, PPE Trans Pan, Bushwacker fender flares, PPE Oil Centrifuge, And other non-go-fast things.
Things still need to put in: PCV Re-Route,Air Dog AD-200.
I have one that I set the Fuel pressure, Pulse Width and commanded fuel volume to zero for all tables. Truck turns over but will not fire. I'm sure you can accomplish the same thing with the newer ECM's.
Will this potentially damage the engine?
07 El Bee Zee
Little faster than stock...
If you have to park the truck for a while, just remove the fuse that powers the ecm.
That is only good if you know it would not need to be moved. I did it the other way I said because if my roommates needed to move it to get things out of the garage at 3mph that can be done.Originally Posted by DuramaxPowered
2008 2500HD 4X4 LTZ Z71 6.6L LMM
Mods: EFILive, MBRP 4" DPF Delete, BD Manifold, SD Manifold, SD Center Link, SD Sleeves, S&B Intake, FS-2500, PPE Trans Pan, Bushwacker fender flares, PPE Oil Centrifuge, And other non-go-fast things.
Things still need to put in: PCV Re-Route,Air Dog AD-200.
Posting Permissions
Reply With Quote