V2 problems :(

[CDR]

First let me just start off saying that I find EFI Live to be the best tuning tool available on the market. Now with that said and out of the way let me now say I HATE this V2 box! Every thing I have ever tried with it has never worked out. Instead of even going threw my previous problems let me just start with my current problem....

No matter what I try I can not get my VS to display imperial units. If I go to settings and change to imperial units the units that are changed just don't ready anything correctly at all they stay stuck at the same reading.

The second problem not all my units are changed to imperial....

Here is a copy of my options.txt please let me know if i'm doing something wrong!



__________________________________________________ _____________________
; | |
; | Copyright © 1999-2007 |
; | EFILive Limited |
; | web: http://www.efilive.com |
; | email: info@efilive.com |
;
;
;Caption Active Controllers (Engine&Trans) PCU Hot Key (Ctrl+Fx)
;--------------- ------ -------------------------- -------- -----------------
LS1 98|Manual, Y, LS1A_M, PCU
LS1 98|Auto, Y, LS1A_A, PCU
LS1 99+|Manual, Y, LS1B_M, PCU, 1
LS1 99+|Auto, Y, LS1B_A, PCU
P10|Manual, Y, P10_M, PCU
P10|Auto, Y, P10_A, PCU
P12|Manual, Y, P12_M, PCU
P12|Auto, Y, P12_A, PCU
E40|Manual, Y, E40, PCU
E40|Auto, Y, E40&T42, PCU
E38|Manual, Y, E38, PCU
E38|Auto, Y, E38&T43, PCU, 2
E67|Manual, Y, E67, PCU
E67|Auto, Y, E67&T43, PCU
LB7|Manual, Y, LB7, PCU
LB7|Auto, Y, LB7&AL5, PCU, 3
LLY|Manual, Y, LLY, PCU
LLY|Auto, Y, LLY&AL5, PCU
LBZ|Manual, Y, LBZ, PCU
LBZ|Auto, Y, LBZ&AL6, PCU, 4
LMM|Manual, Y, LMM, PCU
LMM|Auto, Y, LMM&AL6, PCU
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
Unused, N
; __________________________________________________ _______________________
*PSL,PSL_07,PSL_08
;
;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
PCM, ECT, -40:110:1:1:0
PCM, FUELSYS
PCM, IAT
PCM, LONGFT1
PCM, EOPS
PCM, MAP
PCM, RPM, 0:6500:2:1:0
PCM, SPARKADV
PCM, TP
PCM, VSS
PCM, HO2S11

; __________________________________________________ _______________________
*PSL,PSL_09,PSL_11,PSL_13

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
ECM, ECT, -40:110:1:1:0
ECM, FUELSYS
ECM, IAT
ECM, LONGFT1
ECM, LONGFT2
ECM, MAP
ECM, RPM, 0:6500:2:1:0
ECM, SPARKADV
ECM, TP
ECM, VSS
ECM, AFR_B|AFRATIO_M
ECM, HO2S11
ECM, HO2S21
ECM, INJPWB1
ECM, INJPWB2
ECM, KNKRET

; __________________________________________________ _______________________
*PSL,PSL_10,PSL_12,PSL_14

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
ECM, ECT, -40:110:1:1:0
ECM, FUELSYS
ECM, IAT
ECM, LONGFT1
ECM, LONGFT2
ECM, MAP
ECM, RPM, 0:6500:2:1:0
ECM, SPARKADV
ECM, TP
ECM, VSS
ECM, AFR_B|AFRATIO_M
ECM, HO2S11
ECM, HO2S21
ECM, INJPWB1
ECM, INJPWB2
ECM, KNKRET
; T42 4/5 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR

; __________________________________________________ _______________________
*PSL,PSL_15,PSL_17

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------

PCM, TP_A
PCM, ECT
PCM, IAT
PCM, MAF
PCM, RPM
PCM, VSS
PCM, BARO2
PCM, BOOST_M
PCM, FRPACT
PCM, FRPDES
PCM, FUELQ_MAIN_M
PCM, MAINBPW
PCM, MNINJTIM
PCM, PIINJTIM
PCM, PILOTRATE

; __________________________________________________ _______________________
*PSL,PSL_16,PSL_18

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------

PCM, TP_A
PCM, ECT
PCM, IAT
PCM, MAF
PCM, RPM
PCM, VSS
PCM, BARO2
PCM, BOOST_M
PCM, FRPACT
PCM, FRPDES
PCM, FUELQ_MAIN_M
PCM, MAINBPW
PCM, MNINJTIM
PCM, PIINJTIM
PCM, PILOTRATE
PCM, FTEMP
PCM, ENGOILP
PCM, ACTBOOST
PCM, EOILTS
PCM, LB7_OILPRES_DMA
; Allison 5 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR
TCM, TRQENG_B

; __________________________________________________ _______________________
*PSL,PSL_19,PSL_21

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
ECM, BARO
ECM, ECT
ECM, FRP_C
ECM, IAT
ECM, MAF
ECM, MAP
ECM, RPM
ECM, VSS
ECM, FRPDES
ECM, MAIN1Q_M
ECM, MAIN1T_M
ECM, MNINJTIM
ECM, PILOT1Q_M
ECM, PILOT1T_M
ECM, TCVPOS

; __________________________________________________ _______________________
*PSL,PSL_20,PSL_22

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
ECM, BARO
ECM, ECT
ECM, FRP_C
ECM, IAT
ECM, MAF
ECM, MAP
ECM, RPM
ECM, VSS
ECM, FRPDES
ECM, MAIN1Q_M
ECM, MAIN1T_M
ECM, MNINJTIM
ECM, PILOT1Q_M
ECM, PILOT1T_M
ECM, TCVPOS
; Allison 6 speed
TCM, TFT
TCM, TIS
TCM, TOS
TCM, TCCSLIP
TCM, GEAR
TCM, TRQENG_B

; __________________________________________________ _______________________
;
; PID Custom Units
; ----------------------
;
; PID specifies the controller and PID for which to define a custom unit
; Caption is the caption displayed on screen during BB logging (8 characters maximum).
; From is the default display units name.
; To is the converted display units name.
; Prec is the number of decimal places to display
; Factor the metric value of the PID is multiplied by Factor.
; Offset is then added.
; Invert set to Y to cause the metric value of the PID to be inverted prior to multiplying by Factor
;
; __________________________________________________ _______________________
*PCU

;PID Caption From To Prec Factor Offset Invert
;------------ --------- --------- --------- ---- ------------ ------------ ------
PCM,ECT, Coolant, °C, °F, 0, 1.800000, 3.200000E1, Y
PCM,MAP, M'Fold, kPa, psi, 1, 1.450377E-1, 0.000000, Y
PCM,VSS, Speed, kmh, mph, 0, 6.213712E-1, 0.000000, Y
PCM,SPARKADV, Spark
PCM,IAT, Intake, °C, °F, 0, 1.800000, 3.200000E1, Y
PCM,MAF Airflow, g/s, lbs/min, 1, 1.322774E-1, 0.000000, Y
PCM,TP, Throttle
PCM,KR, Knock
TCM,TIS tranny °C, °F, 0, 1.800000, 3.200000E1, Y
TCM,TRQENG_B engine Nm Fp 0, 1.3558, 0.0000000, Y
-, T1, T1, °C, °F, 0, 1.800000, 3.200000E1, Y
-, T2, T2, °C, °F, 0, 1.800000, 3.200000E1, Y

; __________________________________________________ _______________________

[CDR]

Opps I should of added I have a duramax LB7

[joecar]

CDR,

Welcome to the forum...

Some questions:
- are you pressing ENTER on the V2 keypad to switch between units...?
- which firmware/bootblock versions (connect to EFILive Explorer, goto Firmware tab)...?
- which pids do you want to see in Imperial units...?

Your conversions (at the bottom of Options.txt) all have Invert set to Y when it should be N.

Please post your actual Options.txt file (when replying, Go Advanced, then go Manage Attachments, browse to the file and Upload it, post the reply).

Joe

[joecar]

Do you want to try this Options.txt file...

[CDR]

Alright interesting I didn't know you had to say no to the conversion. Let me give the options.txt file you gave me a shot and i'll get back to you thanks!

[CDR]

I tried it today and no suck luck I see only the temperature in imperial. :( My speed and everything else is in metric. I want everything in imperial

[Ninety8C5]

Joecar,

Your Option.txt file was missing several commas in the conversions (MAF,VSS & MAP). I edited and posted the fixed file.

CDR,

Try this Options.txt file.

[joecar]

Joecar,

Your Option.txt file was missing several commas in the conversions (MAF,VSS & MAP). I edited and posted the fixed file.

CDR,

Try this Options.txt file.

Ok, thanks, I got that from a saved file after an install.

[joecar]

CDR, try the file posted by Ninety8C5.

To see imperial, you have to press ENTER one time during display of the active log.

[CDR]

CDR, try the file posted by Ninety8C5.

To see imperial, you have to press ENTER one time during display of the active log.

Ok now I have the MAF the engine temp and the intake in imperial. Tranny temp, injector pressure and everything else is still in metric......