logging pids

[aaronr]

I just up-dated from a v1 to a v2. I’m so confused on how to create new pids so the bbl can log them. So do I create new PID section under the *pls section or do I use existing one. I want to work on ve table using the bbl box to log it. I can't get my anlog AFR to show up. I create a section under of pids

*PSL,PSL_23,PSL_24

;Node PID Alarm (min:max:style:time*10ms:hold*sec)
;---- ---------------- -----------------------------------------
PCM, ECT
PCM, IAT
PCM, MAF
PCM, RPM
PCM, VSS
ECM, SPARKADV
ECM, TP
PCM, KR
PCM, CYLAIR_M
PCM, DYNCYLAIR_M
TCM, TRQENG_B

[mr.prick]

You can overwrite the ones you don`t want in
the section your controller is under.
See the PID descriptions.txt in:
C:\Program Files\EFILive\V8\Documents\Pid Descriptions
for the proper way to write them.

[aaronr]

You can overwrite the ones you don`t want in
the section your controller is under.
See the PID descriptions.txt in:
C:\Program Files\EFILive\V8\Documents\Pid Descriptions
for the proper way to write them.

So how do i pick what i want. Please give ex.
thanks.

[joecar]

Here an example (my Options.txt file)...

Modify one of the 5 pid lists...

In each pid list add up the total channel count... the total channel count has to be 24 or less...

refer to C:\Program Files\EFILive\V8\Documents\Pid Descriptions to see how many channels each pid uses
(print Options.txt on paper, then pencil in each pid's channel count, then it's easier to add them up).

[joecar]

LS1B_A = 1999+ LS1 with AT.
LS1B_M = 1999+ LS1 with MT.

[joecar]

Oh, in my example, you can replace EQIVRATIO with AFR if you want AFR.

[aaronr]

Can your sd card be bigger than 2g.

[aaronr]

How do i get my anlog to work with my plx gauge??
I will be switching to rs232 when the chip get here.

[mr.prick]

Right click the PID for more info.
The analog setting for the PLX is:
AFR = {EXT.AD1}*2+10

[aaronr]

Right click the PID for more info.
The analog setting for the PLX is:
AFR = {EXT.AD1}*2+10

So i would put this in my Options.txt currect.
How change my ECT and IAT to F*.