Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: logging pids

  1. #11
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by aaronr View Post
    So i would put this in my Options.txt currect.
    How change my ECT and IAT to F*.
    See my Options.txt...

    Goto almost the end where is says AD1 and AD2...

    my AFR = v * 1.000 + 11.000 so my constants are 1.000 and 11.000

    change yours to 2.000 and 10.000.

    Also there you will see how ECT is converted to *F...

    When you press ENTER on V2's keypad, the LCD displays these alternate units (as defined by these conversions).

  2. #12
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    your SD card cannot be bigger than 2G... if it is then I think anything above 2G is ignored...

  3. #13
    Senior Member
    Join Date
    Nov 2007
    Posts
    149

    Default

    How do get injector duty cycle bank one to show up?? (calc.injdc)
    So is there a way that can show my ect and iat in (F) but still Map sensor in Kpa instead of psi? Can we flash tunes with the black box yet?
    2006 Trailblazer SS
    Twin Turbo 67 Chevy Truck
    SOLD Truck 2002 Chevy kb turbo t70 5.7l

  4. #14
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    INJDC is viewed later on the PC... it can't be viewed on V2 yet.

    To show MAP in kPa and IAT/ECT in *F, try the attached Options.txt (press ENTER while viewing log).

    BBF: not yet, but Paul says soon.
    Attached Files Attached Files

  5. #15
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    FWIW
    calc.pids can be selected after data is logged,
    as long as you have the prerequisite PIDS logged before.

    Example:
    Log GM.IBPW1 & SAE.RPM then after the log is loaded, in the PIDS tab select CALC.INJDC1/CALC.INJDC2, the log will then replot.
    Last edited by mr.prick; February 16th, 2009 at 04:51 AM.
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  6. #16
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    That is correct...

    when viewing a BBL log on your PC, goto the PIDs tab and select the calc pids...
    this works provided the BBL log contains the calc pids' prerequisite pids.

  7. #17
    Senior Member
    Join Date
    Nov 2007
    Posts
    149

    Default

    I just need to know witch pid need afr on the plx gauge.
    I'm trying to set my VE map to work with new plx gauge the converted to use the serial cable for the V2. thanks
    2006 Trailblazer SS
    Twin Turbo 67 Chevy Truck
    SOLD Truck 2002 Chevy kb turbo t70 5.7l

Page 2 of 2 FirstFirst 12

Similar Threads

  1. BB logging pids
    By fire0021 in forum FlashScan V2 BB Logging
    Replies: 13
    Last Post: January 30th, 2009, 11:47 AM
  2. Issues logging E38 PIDS
    By thunder550 in forum FlashScan V2 BB Logging
    Replies: 0
    Last Post: April 28th, 2008, 04:52 PM
  3. More PIDs in E67 for BB logging?
    By scdyne in forum Black Box Logging
    Replies: 0
    Last Post: January 30th, 2008, 11:22 AM
  4. Logging E38 Specific PIDS W 08 Z06
    By 02Z06 in forum E37, E38 & E67 PFI ECM's
    Replies: 5
    Last Post: November 12th, 2007, 11:04 PM
  5. Best PIDs for Logging Dry Shots?
    By Beer99C5 in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 15
    Last Post: July 23rd, 2006, 05:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •