what calc pids do i need to set up to use an autometer wideband gauge to log analog into the v2 so i can do calc.vet tuning. can anyone help me make a pid list.
what calc pids do i need to set up to use an autometer wideband gauge to log analog into the v2 so i can do calc.vet tuning. can anyone help me make a pid list.
Autometers are programmable.
We'll need to know the programmed Lambda/AFR range.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
im new to this stuff so what do you mean by programmed lambda/afr range
The slope & intercept are needed in order to convert voltage to afr or lambda.
Example:
4 volts = 20 afr
0 volts = 10 afr
stoich afr =14.7
voltage from WBO2 = 1.88
(20-10)/(0-4) = 2.5 (slope)
0 volts = 10 (intercept)
(1.88*2.5)+10 = 14.7
Preferably you want to know the programmed Lambda slope & intercept because
any stoich AFR value can be converted from that.
Link in the bottom of my sig has more.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________