I'm getting my V2 on Monday, and I was wondering if I can command the torque converter for troubleshooting purposes?
I'm getting my V2 on Monday, and I was wondering if I can command the torque converter for troubleshooting purposes?
Yes you can.
Ok, Thank you
I should have asked you this first: which trans do you have...?
Allison 1000
Ok, got my EFI live v2, but I can't figure out how to command the torque converter. Does anyone know how to do this?
Start scantool, File->Select Controller (select your flavor of Allison), File->Connect, goto DVT tab, select your Allison controller, click Activate, goto Gear tab, checkmark TCC Solenoid, click Turn On.
Be careful, use common sense.
A40.
When I connect to the controller though with EFI live 7.5 scan tool, I do not have any supported PID's for transmission. Any idea why?
Do this:
- On the PIDs tab, uncheck Supported;
- File->Select Controller, and select A40 Allison 6 Speed TCM;
- File->Enter VIN, and enter the VIN;
- Info->Validate Pids, and let it complete;
you should now see a bunch of pids.