Results 1 to 10 of 12

Thread: Constant Disconnects and Detection of Interface

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Apr 2010
    Posts
    3

    Default Constant Disconnects and Detection of Interface

    Having not used it in years, I recently installed 7.5 for use with my AT V2 interface. It detects the interface and connects, but as soon as it begins collecting data, it disconnects and redetects the interface as below. I also note that it sets the speed to 19,200 regardless of the port setting.

    Any input is appreciated.

    Thanks, Kris

    11:36:26.140: Autodetect interface ...
    11:36:26.281: Interface firmware version: 2.0.2
    11:36:26.281: Connection to [AT1] interface is OK
    11:36:26.312: Autodetect PCM...
    11:36:26.359: Connection to PCM is OK
    11:36:26.359: Autodetect TCM...
    11:36:27.375: TCM not detected.
    11:36:27.390: Current protocol: "SAE J1850 VPW"
    11:36:27.406: Interface firmware model: AT1
    11:36:27.421: Interface firmware version: 2.0.2
    11:36:27.437: Interface firmware date: Sep 24, 2002
    11:36:27.453: AutoTap serial number: xxxxxx
    11:36:27.531: Request GM VIN...
    11:36:27.640: VIN: xxxxxx
    11:36:27.656: Request serial number...
    11:36:27.765: Serial number: xxxxxx
    11:36:27.765: Request hardware number...
    11:36:27.828: Hardware: 9386530
    11:36:27.828: Request GM operating system...
    11:36:27.875: GM operating system: 12593358
    11:36:27.875: Request GM NVM...
    11:36:27.921: GM NVM: 12204901
    11:36:27.921: Request GM Engine calibration...
    11:36:27.968: Request GM Engine diagnostics...
    11:36:28.015: Request GM Transmission calibration...
    11:36:28.062: Request GM Transmission diagnostics...
    11:36:28.125: Request GM Fuel system...
    11:36:28.156: Request GM System...
    11:36:28.203: Request GM Speedometer...
    11:36:28.250: Request GM BCC...
    11:36:28.296: GM BCC: DHYN
    11:36:28.296: Request GM VAT/IGN Cycles...
    11:36:28.343: GM VAT/IGN cycles: 0
    11:36:28.343: Request GM oil life...
    11:36:28.562: Oil life: 100
    11:36:28.562: Query support for stream.01 scan mode...
    11:36:28.750: Query support for stream.02 scan mode...
    11:36:28.953: Calculating number of dynamic packet ID's...
    11:36:30.046: Loading generic configuration file: sae_generic.txt
    11:36:30.046: User defined calculated PIDs file: calc_pids.txt
    11:36:30.046: Enhanced configuration file: gm_enhanced.prn
    11:36:30.718: Request GM VIN...
    11:36:31.015: VIN: xxxxxxx
    11:36:31.015: Request GM operating system...
    11:36:31.062: GM operating system: 12593358
    11:36:31.078: Validating PIDs...
    11:36:31.359: Validating Modules...
    11:36:31.375: Initialising PIDs...
    11:36:31.921: Initialising Modules...
    11:36:31.953: Ready.

    11:36:42.546: Programming PID GM.AFR, into dynamic packet 0[0..1] offset: 0...
    11:36:42.593: Programming PID GM.MAFFREQ, into dynamic packet 0[2..3] offset: 2...
    11:36:42.640: Programming PID SAE.FUELSYS, into dynamic packet 0[4..5] offset: 4...
    11:36:42.703: Programming PID SAE.MAF, into dynamic packet 1[0..1] offset: 0...
    11:36:42.750: Programming PID SAE.RPM, into dynamic packet 1[2..3] offset: 2...
    11:36:42.796: Programming PID GM.FTC, into dynamic packet 1[4..4] offset: 4...
    11:36:42.843: Programming PID GM.HO2S11, into dynamic packet 1[5..5] offset: 5...
    11:36:43.062: Programming PID GM.HO2S21, into dynamic packet 2[0..0] offset: 0...
    11:36:43.109: Programming PID GM.KR, into dynamic packet 2[1..1] offset: 1...
    11:36:43.140: Programming PID SAE.ECT, into dynamic packet 2[2..2] offset: 2...
    11:36:43.203: Programming PID SAE.IAT, into dynamic packet 2[3..3] offset: 3...
    11:36:43.234: Programming PID SAE.LONGFT1, into dynamic packet 2[4..4] offset: 4...
    11:36:43.281: Programming PID SAE.LONGFT2, into dynamic packet 2[5..5] offset: 5...
    11:36:43.312: Programming PID SAE.MAP, into dynamic packet 3[0..0] offset: 0...
    11:36:43.359: Programming PID SAE.SHRTFT1, into dynamic packet 3[1..1] offset: 1...
    11:36:43.406: Programming PID SAE.SHRTFT2, into dynamic packet 3[2..2] offset: 2...
    11:36:43.453: Programming PID SAE.SPARKADV, into dynamic packet 3[3..3] offset: 3...
    11:36:43.484: Programming PID SAE.TP, into dynamic packet 3[4..4] offset: 4...
    11:36:43.515: Programming PID SAE.VSS, into dynamic packet 3[5..5] offset: 5...
    11:36:43.562: Using scan mode: Stream-Fast
    11:36:45.562: Autodetect interface ...
    11:36:46.234: Interface not detected
    11:36:46.250: Autodetect interface ...
    11:36:47.125: Interface not detected
    11:36:47.140: Autodetect interface ...
    11:36:48.015: Interface not detected
    11:36:48.031: Autodetect interface ...
    11:36:48.703: Interface not detected
    11:36:48.718: Autodetect interface ...
    11:36:49.593: Interface not detected
    11:36:49.656: Autodetect interface ...
    11:36:50.453: Interface firmware version: 2.0.2
    11:36:50.453: Connection to [AT1] interface is OK
    11:36:50.468: Autodetect PCM...
    11:36:50.531: Connection to PCM is OK
    11:36:50.531: Programming PID GM.AFR, into dynamic packet 0[0..1] offset: 0...
    11:36:50.578: Programming PID GM.MAFFREQ, into dynamic packet 0[2..3] offset: 2...
    11:36:50.625: Programming PID SAE.FUELSYS, into dynamic packet 0[4..5] offset: 4...
    11:36:50.671: Programming PID SAE.MAF, into dynamic packet 1[0..1] offset: 0...
    11:36:50.718: Programming PID SAE.RPM, into dynamic packet 1[2..3] offset: 2...
    11:36:50.765: Programming PID GM.FTC, into dynamic packet 1[4..4] offset: 4...
    11:36:50.812: Programming PID GM.HO2S11, into dynamic packet 1[5..5] offset: 5...
    11:36:50.859: Programming PID GM.HO2S21, into dynamic packet 2[0..0] offset: 0...
    11:36:50.921: Programming PID GM.KR, into dynamic packet 2[1..1] offset: 1...
    11:36:50.968: Programming PID SAE.ECT, into dynamic packet 2[2..2] offset: 2...
    11:36:51.015: Programming PID SAE.IAT, into dynamic packet 2[3..3] offset: 3...
    11:36:51.062: Programming PID SAE.LONGFT1, into dynamic packet 2[4..4] offset: 4...
    11:36:51.109: Programming PID SAE.LONGFT2, into dynamic packet 2[5..5] offset: 5...
    11:36:51.171: Programming PID SAE.MAP, into dynamic packet 3[0..0] offset: 0...
    11:36:51.218: Programming PID SAE.SHRTFT1, into dynamic packet 3[1..1] offset: 1...
    11:36:51.281: Programming PID SAE.SHRTFT2, into dynamic packet 3[2..2] offset: 2...
    11:36:51.328: Programming PID SAE.SPARKADV, into dynamic packet 3[3..3] offset: 3...
    11:36:51.375: Programming PID SAE.TP, into dynamic packet 3[4..4] offset: 4...
    11:36:51.515: Programming PID SAE.VSS, into dynamic packet 3[5..5] offset: 5...
    11:36:52.921: Autodetect interface ...
    11:36:53.578: Interface not detected
    11:36:53.593: Autodetect interface ...
    11:36:54.375: Interface not detected
    11:36:54.390: Autodetect interface ...
    11:36:55.250: Interface not detected
    11:36:55.265: Autodetect interface ...
    11:36:55.921: Interface not detected
    11:36:55.937: Autodetect interface ...
    11:36:56.796: Interface not detected
    11:36:56.828: Autodetect interface ...
    11:36:57.593: Interface firmware version: 2.0.2
    11:36:57.593: Connection to [AT1] interface is OK
    11:36:57.609: Autodetect PCM...
    11:36:57.640: Connection to PCM is OK
    11:36:57.656: Programming PID GM.AFR, into dynamic packet 0[0..1] offset: 0...
    11:36:57.703: Programming PID GM.MAFFREQ, into dynamic packet 0[2..3] offset: 2...
    11:36:57.734: Programming PID SAE.FUELSYS, into dynamic packet 0[4..5] offset: 4...
    11:36:57.781: Programming PID SAE.MAF, into dynamic packet 1[0..1] offset: 0...
    11:36:57.843: Programming PID SAE.RPM, into dynamic packet 1[2..3] offset: 2...
    11:36:57.890: Programming PID GM.FTC, into dynamic packet 1[4..4] offset: 4...
    11:36:57.921: Programming PID GM.HO2S11, into dynamic packet 1[5..5] offset: 5...
    11:36:57.953: Programming PID GM.HO2S21, into dynamic packet 2[0..0] offset: 0...
    11:36:58.000: Programming PID GM.KR, into dynamic packet 2[1..1] offset: 1...
    11:36:58.031: Programming PID SAE.ECT, into dynamic packet 2[2..2] offset: 2...
    11:36:58.078: Programming PID SAE.IAT, into dynamic packet 2[3..3] offset: 3...
    11:36:58.109: Programming PID SAE.LONGFT1, into dynamic packet 2[4..4] offset: 4...
    11:36:58.156: Programming PID SAE.LONGFT2, into dynamic packet 2[5..5] offset: 5...
    11:36:58.203: Programming PID SAE.MAP, into dynamic packet 3[0..0] offset: 0...
    11:36:58.265: Programming PID SAE.SHRTFT1, into dynamic packet 3[1..1] offset: 1...
    11:36:58.312: Programming PID SAE.SHRTFT2, into dynamic packet 3[2..2] offset: 2...
    11:36:58.359: Programming PID SAE.SPARKADV, into dynamic packet 3[3..3] offset: 3...
    11:36:58.406: Programming PID SAE.TP, into dynamic packet 3[4..4] offset: 4...
    11:36:58.453: Programming PID SAE.VSS, into dynamic packet 3[5..5] offset: 5...
    11:36:58.781: Autodetect interface ...
    11:36:58.921: Interface firmware version: 2.0.2
    11:36:58.921: Connection to [AT1] interface is OK
    11:36:58.937: Autodetect PCM...
    11:36:58.984: Connection to PCM is OK
    11:37:02.515: Autodetect interface ...
    11:37:03.171: Interface not detected
    11:37:03.187: Autodetect interface ...
    11:37:04.046: Interface not detected
    11:37:04.062: Autodetect interface ...
    11:37:09.390: Interface firmware version: 2.0.2
    11:37:09.406: Connection to [AT1] interface is OK
    11:37:09.406: Autodetect PCM...
    11:37:09.453: Connection to PCM is OK
    11:37:09.453: Programming PID GM.AFR, into dynamic packet 0[0..1] offset: 0
    Attached Files Attached Files
    Last edited by KrisS; April 18th, 2010 at 03:32 AM. Reason: Error report added

Similar Threads

  1. Constant 02 sensor codes
    By RevGTO in forum Gen III V8 Specific
    Replies: 26
    Last Post: June 7th, 2009, 10:07 AM
  2. stock n02 reading constant 0.45mv
    By stigmundfreud in forum Gen III V8 Specific
    Replies: 4
    Last Post: August 16th, 2007, 11:13 AM
  3. Question about Knock Detection
    By dc_justin in forum General
    Replies: 5
    Last Post: June 23rd, 2006, 01:30 AM
  4. Modifying misfire detection tables ?
    By kp in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: May 13th, 2005, 01:09 PM
  5. Misfire detection table
    By jfpilla in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: January 20th, 2005, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •