Well it's me again, the cursed or ????

Using the AutoVE tutorial and my LM-1 controller, my AFRs in scan data and Dashboard are in the 40's.
Volts/AFRs are set correctly in Logworks2 per the EFI info. The LM-1 controller AFR read out is correct and what you'd expect to see.
C=Green, D=ground, E=red wire.
0.05V=10AFR, 4.5V=18AFR.

I've noticed that those settings don't always stay after set in LM programmer V3.04.
This is starting to really try my exceptional patients.

Thanks, Curt