I'll try to sum this up as quick as possible. Just getting my feet wet with efi live i have the scan and tune was working on my 06 tbss needed to enable the e fans for it. I read the tune safed at as a backup for myself everything works or atleast the doors still latch. Looked at the wifes 06 Grand Prix GXP was wondering what the speed limits were decided i'd just read the tune and check the file so I read the tune ect... Closed the doors thought nothing was wrong i remember last thing i did was turn the key to off and pull the key out when it was doing that countdown thing. Well now it's the morning wife come inside says he door doesn't stay closed hmmm.... looked at it well the door closes on the latch but you can pull the door right open again and it's the same with the passenger side as well the back doors work fine. So it's just the front two doors doing it and i have no idea what i did or if i did anything wrong but really need to get it fixed. All I've did so far was re read the calibrations and i'll copy and paste a log of that and dissconnect the battery for atleast 20mins Please anyone help

09:23:48.869: Scanning for EFILive FlashScan V2 HAPI
09:23:48.884: Autodetect interface ...
09:23:49.118: Interface firmware version: 2.7.9
09:23:49.134: Connection to [FSV2] interface is OK
09:23:49.134: CAN-VPW Bridge Activated
09:23:49.196: Current protocol set to: "ISO 15765 CAN"
09:23:49.212: Autodetect PCM...
09:23:51.240: PCM not detected.
09:23:51.240: Autodetect ECM...
09:23:51.255: Connection to ECM is OK
09:23:51.255: Autodetect TCM...
09:23:51.271: Connection to TCM is OK
09:23:51.287: Current protocol: "ISO 15765 CAN"
09:23:51.505: USB driver version: 4.0.0
09:23:51.505: USB library version: 3.1.18
09:23:51.521: Interface firmware model: FSV2
09:23:51.536: Interface firmware model: FSV2
09:23:51.552: Interface firmware version: 2.7.9
09:23:51.567: Interface firmware date: Mar 31, 2011
09:23:51.583: FlashScan serial number: 003599128085
09:23:51.599: FlashScan license number: 003599128085
09:23:51.864: Getting status...
09:23:51.911: Status: OK.
09:23:58.416: Disconnecting ...
09:23:59.243: CAN-VPW Bridge Deactivated
09:23:59.243: Disconnected
09:23:59.898: Scanning for EFILive FlashScan V2 HAPI
09:23:59.913: Autodetect interface ...
09:24:00.163: Interface firmware version: 2.7.9
09:24:00.163: Connection to [FSV2] interface is OK
09:24:00.381: USB driver version: 4.0.0
09:24:00.381: USB library version: 3.1.18
09:24:00.397: Interface firmware model: FSV2
09:24:00.413: Interface firmware model: FSV2
09:24:00.428: Interface firmware version: 2.7.9
09:24:00.444: Interface firmware date: Mar 31, 2011
09:24:00.459: FlashScan serial number: 003599128085
09:24:00.475: FlashScan license number: 003599128085
09:24:00.506: Disconnecting ...
09:24:01.317: CAN-VPW Bridge Deactivated
09:24:01.317: Disconnected
09:24:01.973: Scanning for EFILive FlashScan V2 HAPI
09:24:01.988: Autodetect interface ...
09:24:02.222: Interface firmware version: 2.7.9
09:24:02.238: Connection to [FSV2] interface is OK
09:24:02.253: CAN-VPW Bridge Activated
09:24:02.316: Current protocol set to: "ISO 15765 CAN"
09:24:02.331: Autodetect PCM...
09:24:04.359: PCM not detected.
09:24:04.359: Autodetect ECM...
09:24:04.391: Connection to ECM is OK
09:24:04.391: Autodetect TCM...
09:24:04.422: Connection to TCM is OK
09:24:04.437: Current protocol: "ISO 15765 CAN"
09:24:04.656: USB driver version: 4.0.0
09:24:04.656: USB library version: 3.1.18
09:24:04.671: Interface firmware model: FSV2
09:24:04.687: Interface firmware model: FSV2
09:24:04.703: Interface firmware version: 2.7.9
09:24:04.718: Interface firmware date: Mar 31, 2011
09:24:04.734: FlashScan serial number: 003599128085
09:24:04.749: FlashScan license number: 003599128085
09:24:05.046: Getting status...
09:24:05.093: Status: OK.
09:24:05.826: Bootloader version: E40_v1.2R (03FE-6187)
09:24:05.826: Preparing ECM for reading flash...
09:24:05.857: ECM seed is: $2071
09:24:05.857: Unlock attempt 1 of 1
09:24:05.997: Initializing ECM...
09:24:07.245: Initializing ECM, step 1 of 4
09:24:07.245: Initializing ECM, step 2 of 4
09:24:08.509: Initializing ECM, step 3 of 4
09:24:11.005: Initializing ECM, step 4 of 4
09:24:11.442: Initializing bootloader...
09:24:11.785: Initializing bootloader, step 1 of 2
09:24:12.237: Initializing bootloader, step 2 of 2
09:24:12.752: ECM ready for reading flash.
09:24:12.861: AMD AM29BL802C - 1Mb
09:26:05.478: Total time: 01:52
09:26:05.494: Rebooting ECM... (please wait up to 8 seconds)
09:26:06.632: ECM has booted successfully...
09:26:07.646: Clear emisison related DTCs...
09:26:07.662: Clear DTCs for all modules...
09:26:09.768: Autodetect interface ...
09:26:10.018: Interface firmware version: 2.7.9
09:26:10.018: Connection to [FSV2] interface is OK
09:26:10.018: Autodetect ECM...
09:26:10.049: Connection to ECM is OK
09:26:25.163: Done!