So I recently upgraded my injectors from my old set, with my old tune I was able to achieve 160mm3 up to around 3500 or so befor eit would fall down to about 130 at 4000. I have since installed the new injectors took truck out logged it and now it max's out at 100mm3 at 3500 on every single log I do. no matter the tables I modify.. I did just swap a stick into the truck vs the auto.. one thing I noticed was with the other trucks Ive tuned I cannot get the load% on a log to go past 40% with a stick where the auto's I have seen 110% in some logs but mostly 99-100% they all carry 160mm3 through the run to about 3400. does load have a effect on the mm3? The truck actually runs better with new injectors at 100mm3 than old injectors at 160mm3. I understand that its just a quanity expression but the injectors I put in new are smaller.. so wouldnt I want more mm3?