Calc.VET: correcting MAF and calculating VE (in single log)

[wcj]

I must be doing something completely wrong.

6. Update Calibration, steps:

8. Select all cells in the table by clicking in the extreme top-left grey cell, then right click and select
Copy with labels (Shift+Ctrl+C).
9. Switch back to the EFILive Tuning Tool.
10. Open calibration {B0101} "Main VE Table".
11. Right click on any cell and select Paste->Paste with labels (Shift+Ctrl+V).

When I follow step 11, it completely jacks up my VE table because it replaces the VE values with the values from the CALC.VET map.

My CALC.VET map looks similar to the example shown on page 1.



My VE table looks like this.



Please tell me I just overlooked something very simple.

Thx.