I have twins on my 06 and the top turbo is the stock HE351 with the factory wastegate actuator on it and the bottom turbo is a non-wastegated S400. The company I bought the kit from makes the piping so it works with the stock wastegate actuator instead of clocking the turbo and running an adjustable gate. But here's my question. The instructions say to set the gate on the top turbo to open up with anywhere between 25-35# (gotta figure out which runs best on your combo). I know the boost is reference right off the turbine housing, but is there something in EFI LIVE that will allow me to change that value? Or, am I stuck wherever its set to open? If its non-adjustable, I think I'm going to get an adjustable one so I can at least tune it instead of not having that option.

Thanks in advance.