Results 1 to 6 of 6

Thread: Dual fueler SURGE AT WOT issue ECM overcorrecting? PID LOOP?..Log Inside

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. January 2nd, 2012 #1
    Dmaxink
    Dmaxink is offline
    Lifetime Member Dmaxink's Avatar
    Join Date
    Nov 2009
    Posts
    1,176

    Default Dual fueler SURGE AT WOT issue ECM overcorrecting? PID LOOP?..Log Inside

    I'm at a near witts end here. Possibly this is not a tune issue, but sure seems to be fixable via FRP PID LOOP correcting. It seems as though the ecm is seeing desired under and overshooting actual and over-correcting.

    Does anyone have any insight? Possibly fought and conquered this issue on a lbz with dual fuelers? I was commanding 183mpa and 2800ish uS.

    Thanks for any help, i sure appreciate it.

    -Kory
    Attached Files Attached Files
    -Kory

    I'm out of ideas? Nah trick... When in doubt, 0xFFFF it out!

    http://www.PPEI.com/
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Inside the CM849B ECM
    By GMPX in forum Cummins 5.9L
    Replies: 12
    Last Post: August 11th, 2015, 09:56 AM
  2. custom pid for GM.ENGOILP ...inside... sticky info
    By WHYTRYZ06 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: December 15th, 2009, 05:57 PM
  3. 98 cam only minor idle issues (log inside) HELP
    By bad6as in forum Gen III V8 Specific
    Replies: 0
    Last Post: April 9th, 2009, 10:56 AM
  4. not going open loop during WOT Why?
    By mvvette97 in forum Gen III V8 Specific
    Replies: 1
    Last Post: March 2nd, 2008, 12:48 PM
  5. 383 w/Hot Cam tuning problems (tune/log inside)
    By Sherk in forum Gen III V8 Specific
    Replies: 19
    Last Post: January 8th, 2008, 08:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules