Having some Problems with LM-1

[mwalls54]

I am having some problems with the LM1 and Flashscan. I cannot get my pids for Wideband AFR1 LM1 and AFR2 LM1 to validate. I can get all other PIDS to validate that are associated with the wide band. All the wires are connected correctly. I have changed my sae generic to this.

# Innovate LM-1 WBO2
# ========================
*CLC-00-928
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 20.0 .1 "{EXT.AD1}*1.9936)+ 9.9832"
*CLC-00-929
factor 0.0 2.0 .1 "{CALC.AFR_LM11.AFR}/{GM.AFR}
*CLC-00-930
V 0.0 5.0 .1 "{EXT.AD2}"
AFR 10.0 20.0 .1 "{EXT.AD2}*1.9936)+ 9.9832
*CLC-00-931
factor 0.0 2.0 .1 "{CALC.AFR_LM12.AFR}/{GM.AFR}


and I have my LM1 set to
analog output 2
0V = 10 AFR
5V=20AFR
logging rate 1/12

Can some one help me before i go crazy