Engine:
05 6.0/LQ4/H2 Hummer.
Hdw # 12589162
OS # 12592618

I am ready to start tuning, using Calc.Vet. I have changed injectors to LS2, pt # 0280158049.
My inj flow test @ 58psi indicates a flow rate of 32.13PPH. I am using a vac referenced reg so the IFR is set at a single value.
So far, I see that the min pulse on the stock inj is 0.757867, and is a constant value.
From what I can find on the 049 inj is a scaled table, 1.000 up to 1530rpm, then at 2040 it is 1.1484. After that, and for the remainder of the scale, [8190rpm], it is 1.2969.
Since I have the LS1B PCM, and the min pulse values I listed are from an E40,[2005 Vette], would they be OK to use??
I am thinking I also need to correct the offset values. Y/N??

I have the Calc.Vet tun set up. Would someone be willing to give it, and the current tune, a look see B4 I loaded it?

TIA,
Chuck